MelbourneUAV Outback Challenge entry goes down hard

Sorry to see this. It was a beautiful bird (see below). It used the AttoPilot autopilot. 


From the team's Twitter feed

We had an RC Lockout in Maunal Mode at 25M AGL while coming into land on Saturday. More photos on the website soon :(

Moments before:

Views: 1543


Moderator
Comment by Grips on February 19, 2012 at 5:20pm

Was this Tridge's team?


3D Robotics
Comment by Chris Anderson on February 19, 2012 at 5:22pm

No. He's on the CanberraUAV team.


Moderator
Comment by Grips on February 19, 2012 at 5:22pm

ah I was just coming back to edit my post..

Goodluck Tridge!

Comment by Scott James on February 19, 2012 at 6:14pm

Wow that was quick!

 

Yeah it was really weird!
 
We were just finishing an awesome morning of flying when it happened...
The UAV was in Manual Mode while coming into land and all of a sudden there was a RC glitch/lockout which caused the Devilray to nose dive!
It was only about 25 meters up when it happened.
Just before it hit the ground I heard the motor rev up, the RC failsafe was set to Autonomous Mode so the Attopilot tried it's hardest to save itself but when your going straight down with only 10M to the ground there was nothing that could be done!
After talking to others that use the site we have found out that we are not the only ones to have a lock out there?
I'm surprised how well the Devilray help up to the crash! We have plans to put  it back together later on, just need a few bits. (Mostly glue and a but of CF)
 
Since the crash all of our electronics have tested to be fine but unfortunately we do not have enough time to order a new Devilray airframe and be able to stay in the Competition, the D2 is due in only 44 days. (I really wish we did!!)
So the hunt is on for a new airframe to get us by that we can install our Atto into!  It's going to be compromise but at least we can still compete. 
 
We were using  Futaba 36Mhz for our RC link at the time. (Using 2.4 for other things)
 
I think it's very important to add that in the last 2 years that we have been using the Attopilot and the Devilray airframe they have performed flawlessly!!
I wish every thing in life was this good.
And I would highly recommend the Devilray and Attopilot to anyone! (Just use reliable RC gear with it!)
 
Cheers,
 
Scott - Melbourne UAV
Comment by Scott James on February 19, 2012 at 6:21pm

More photo's here

 


Developer
Comment by John Arne Birkeland on February 19, 2012 at 6:57pm

Sorry to head about the crash. Lockout's on the old 35-72mhz PCM/PPM systems was sadly just a part of the game, and I think the reason why 2.4ghz took over in a flash. Is it possible to use 433mhz in the competition? With the popularity of FPV, of the shelf R/C 433mhz diversity systems are available.

Comment by Scott James on February 19, 2012 at 7:01pm

Unfortunately 433 is a no go in Australia.   :(

 


Developer
Comment by Mark Colwell on February 19, 2012 at 7:05pm

Sorry about the bad luck, Glue it back together and try again, Manta it has some more life still! 


Admin
Comment by Gary Mortimer on February 19, 2012 at 10:53pm

B&*(£^ck$


Distributor
Comment by Martint BuildYourOwnDrone.co.uk on February 19, 2012 at 11:34pm

Ouch...........

Comment

You need to be a member of DIY Drones to add comments!

Join DIY Drones

© 2014   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service