I am probably going to get hate mail for this, but a clear warning to any future addicts needs to be made. So here goes.

I was doing some spring cleaning and those darn DIY gadgets just kept on coming out of the woodwork. I knew I had a lot of stuff lying around, but this time I even surprised myself. And this is just DIY/FPV/Autopilot electronics currently not installed in a project. I will not show the pile of unfinished projects like copters, planes, rovers etc. It's just embarrassing. And the is also a big pile of general R/C stuff like ESC's motors, servos,  gyros, receivers and such..

Anyways, there should be some well knows gadgets in this picture, and some not so well known ones also. Geek points to the first one to correctly identify them all, excluding the self made stuff that only I would know of.

Morale of the story? Get bigger storage boxes I guess..

Views: 3518

Comment by Richard on May 2, 2012 at 7:37am

An Impressive collection of electronic you have there.... maybe it could be donated to the winner of the next Trust Time Trial! 

Comment by Romushock on May 2, 2012 at 9:09am

Hey John,

Don't desperate, You are not alone...

Comment by Giuseppe Galullo on May 2, 2012 at 9:27am

I also am full of things ... I have to sell some material ...

Comment by John Arne Birkeland on May 2, 2012 at 12:32pm

Randy, those mysterious clear boxes is a home made UHF long range RC radio system (http://diydrones.com/profiles/blogs/long-range-rc-control-and) I used to fly FPV with, before I switched to a RMILEC UHF system.

Comment by Ajienux on May 3, 2012 at 5:29am

wow, geek stuff, nice :)

Comment by Wesley Chuen on May 4, 2012 at 6:48am

Now I know why these things are always out of stock...

Comment by deadfalkon on May 4, 2012 at 9:14am

What are you doing with the PhoneDrone? Have you joined the mailinglist https://groups.google.com/group/phone-drone-adk? 

Comment by Ajienux on May 4, 2012 at 9:19am

@Wesley - lol :D

Comment by John Arne Birkeland on May 4, 2012 at 12:22pm

@deadfalkon: I haven't done much with the PhoneDrone yet, but it was the first 3DR production board using the new 32u2 chip, so I used them to develop and test the new ArduPPM firmware.

Comment by Richard on May 10, 2012 at 2:55pm

wow... how do yo ukeep your workbench so tidy?!

Here's a picture of my lounge....


You need to be a member of DIY Drones to add comments!

Join DIY Drones

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service