Yesterday we have added information about the components you need to build Ecilop Eco and the example of a complete set (we were flying). Visit www.ecilop.com/ecilop-eco or look here:
ADDITIONAL COMPONENTS YOU NEED:
- Engines (4 pcs) with a static thrust of 500-700 gr each and fixing holes 19 mm
- Propellers (4 pcs) a maximum of 10 inches
- ESC (4 pcs) 10-15A
- Flight controller for quadrocopter (1 pcs) no special requirements
- Battery (1 pcs) weight 200-400 gr
- Remote control (1pcs) 7-channel or more
- Engine (1 pcs) with a static thrust 30-90 gr, 10mm mounting hole and R8.5 mm
- Propeller (1 pcs) 2510 or 3020
- ESC (1 pcs) 3A
- Servos (2 pcs) for helicopter tail and maximum width 13 mm
- Gimbal Stabilization Controller (1 pcs)
- Action video camera (1 pcs)
An example of a complete set:
- Engines – MT2206-23
- Propellers – Slow Fly 8×4.5
- ESC – T-motor 10A
- Flight controller – DJI NAZA
- Battery – 4000 mA/h, 3S, 25C
- Remote control – Futaba R6208
- Engine (on the beam) – A05 2900 rpm/v
- Propeller (on the beam) – 2510
- ESC (on the beam) – Plush 6A
- Servos – MKS Ds480
- Gyroscopes – Mini MEMS
- Camera – GoPro-3
- Power wires – AWG16
- Video transmitter – 5.8gHz, 200mW
Comments