Comment by Zac Petterd on January 16, 2010 at 4:25am

Is there any way that I can get it in a format that I can use in version 10 of Inventor?

Comment by Sentinel on January 16, 2010 at 12:09pm

I have updated the link with more file formats, and also a BMP detailing the dimensions should you want to build the model yourself. ;)

3D Robotics Comment by Jordi Muñoz on January 16, 2010 at 12:35pm

Yersterday i tested the borjet for the first time, is really sweet.

Comment by tycinis on January 16, 2010 at 1:41pm

But very expensive , 250€ for a foamie it's a lot.

Comment by Sean McDonald on January 16, 2010 at 1:48pm

Hi,
Looks really nice... I have also designed a Maja look alike in CAD, using wing about 1.8m span, and built most of it from regular HomeDepot green foam/corroplast etc... I have not completed it all as yet, just need to fit servos etc, but I first tried and mounted the motor to the back end.
As per my CAD design COG calculations, it confirmed that with the motor at the very back end, the CG is really a MAJOR issue with this design. Perhaps my motor was too heavy Turnigy 30-35 1100kv, but all the weight eg. batteries need to go very far forward (actually I needed about three 3s 2200 lipos stacked in the nose to get it about right) and actually leaves little use of all the space available behind them for anything except for air. So, not very useful, as this makes it very heavy for hand or bungy launching, I am converting the wing to use two wing mounted motors so as to keep out of view of cameras etc... I will need a week or so to complete it and maiden it.... if we get a break in the rain...

3D Robotics Comment by Jordi Muñoz on January 16, 2010 at 2:22pm

Tycinis,

Germans develop, Chinese copy.

Comment by Zac Petterd on January 16, 2010 at 4:21pm

Great, thanks for uploading it in a few other formats. I saw this a few days a go and thought about trying to make my own CAD model.

Comment by Jesus on January 17, 2010 at 3:17am

Thanks!
But I have a question? Is the airfoil correct? I think it´s very rounded in the leading edge? Any body know which airfoil is it?
Jordi, which is the chinese copy, where can I buy it?
Thanks
Jesús

Comment by Sentinel on January 17, 2010 at 4:36am

Airfoil is not correct, either for the main wing or the tailplane. I was not able to work from accurate/high resolution photos.

Comment by Peter Koppendorfer on January 17, 2010 at 10:16am

HELLO,
I have testet the Maya last jear ! it is OK !
If somone wands it ! i will sell it ! incl. Servos exept. Motor for 150 Euros !

Regards
Peter

Comment

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page