It is my pleasure to inform you that the faa has authorized the 3dr aero a 333 examption for flight in the United States for My company M2 Flight Solutions which has been apart of diy drones for a very long time and now has a 333 exampation from the faa to fly it. I have seen some great ideas come to life and other stuggle. Now I am happy to add to the diy history and 3dr company of using the aero for 3d mapping missions in the state of Alaska as well as the lower 48 states. We use the plane for 3d reconstruction of lands as well as many other great projects. The nicely built aero is a great plane to fly very stable Thanks to the pix hawk auto pilot and the long flight time.

I want to thank Chris Anderson for the help he has giving to me. And for starting this site! It's a great community for knowledge. If you want to read a local article on me and my company please visit the link below and thank you again.

M2 Flight Solutions
CEO Michael Cook


http://www.suasnews.com/2015/05/36167/local-uav-company-lifts-off/

Views: 1460


3D Robotics
Comment by Chris Anderson on May 25, 2015 at 6:24pm

Congrats, Michael!  Made my day.


Developer
Comment by Andrew Tridgell on May 25, 2015 at 6:31pm

fantastic, congratulations Michael!

Comment by Damian McKay Earl ll on May 25, 2015 at 9:51pm

Congrats Michael!


Developer
Comment by Marco Robustini on May 26, 2015 at 12:09am

Congratulations Michael!

Comment by Rai on May 26, 2015 at 12:23am

Congratulations Michael! Success ahead!


Developer
Comment by John Arne Birkeland on May 26, 2015 at 2:30am

Great news!

Comment by Michael Cook on May 26, 2015 at 2:49am

Thank you all! I love this community! Notice how I modify the wing to hold a go pro to take photos! It works wonderfully! I have also done some others as well!

Comment by Chuck Durham on May 26, 2015 at 7:24am

excellent news and I wish you lots of success in your venture

Comment by Eric Coronel on May 26, 2015 at 2:54pm

I was going to ask you about the camera placement, it took me a while to find the GoPro in the wing. Good job!

Comment by Keith Geary on May 27, 2015 at 9:38am

Here's its cousin over the pond! This ones self built with PixHawk and been certified to fly in the UK under the CAA's rules via EuroUSC. Note the CAA serial number UAV 0197

I to would like to thank Chris and everybody on the DIY Drones forum, as without it, I would not have managed to get the plane built and certified.

Comment

You need to be a member of DIY Drones to add comments!

Join DIY Drones

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service