Comment by Jianguo Zhao on January 4, 2010 at 10:16am

cool~！

Comment by Alex on January 4, 2010 at 10:50am

If minimizing weight is the primary goal, 3 rotor would be even better.

Comment by Giles Barton-Owen on January 4, 2010 at 10:53am

Surely it requires either a servo or some heading hold kit? Also on average dosent run one of thhe motors far hotter?

Comment by Martin Seven on January 4, 2010 at 11:08am

Alex, with three rotors you'd need to add a 1 DOF rotary joint with a servo... not sure if that would be lighter than just using 4 rotors on a flat board.

Comment by Varga András on January 4, 2010 at 11:08am

What I see the most amazing is how simple its production is. Just manufacture the PCB board and mount 4 motors. Thousands of these can be produced by a small company within a day.

Comment by Giles Barton-Owen on January 4, 2010 at 11:11am

I know, and a one piece system is so light and easy, no wiring problems.

Comment by Giles Barton-Owen on January 4, 2010 at 11:11am

Problem is it's so light that the control system will have to be knife edge otherwise it will flip...

Comment by Jack Crossfire on January 4, 2010 at 11:16am

Who started selling counter rotating 2" propellers? Those brushed motors wear out fast.

Comment by Xander on January 4, 2010 at 11:39am

Wow, that thing is beautiful

Comment by Matt on January 5, 2010 at 2:12am

That circuit board looks amazing! I like the way that there are minimal individual parts and assembly consists of inserting and soldering the motors. These could be made quite affordable. Another thing that I like is that the parts are such high quality, none of that cheap stuff. I can't wait to see a video.

Comment

• ‹ Previous
• 1
• 2
• Next ›
• Page