Looks cool and costs just $72. From the Hobby King product listing:

The Target Drone is a great little FPV platform that has been specifically designed for the job and not only is the kit cheap to buy, this great little model is also cheap to get in the air.

The Target Drone features an FG fuselage that is open at the front for camera mounting, there is also a built in anti-glare cover. The model is designed for a pusher motor as you would expect and it also features a mid mounted, large hatch for battery and equipment access, the large and open fuselage area not only has plenty of room for your FPV equipment and lipoly, it also provides plenty of battery and ESC cooling from the open front fuselage. The under carriage is robust, featuring screw in alloy leg's at the rear and a steerable nose wheel up front.

The Target Drone is a pretty quick build, servo extension leads are pre-installed into the balsa wing, which is mounted on a CF rod and epoxied into place. The supplied hardware is comprensive and the overall parts count low, meaning you will be experiencing FPV in double quick time. The Target Drone, with it's tailess, swept wing is one of the most unusual and interesting EP FPV models in it's class yet and is sure to get people's attention wherever it flies!

Features:
Robust FG Fuselage
Open Front Camera Mount with Anti-Glare Cover
Large Mid-Mounted Access Hatch
Balsa Constructed Wing & Winglets
Sturdy Under Carriage
Steerable Nose-Wheel
Low Parts Count
All Hardware Included
Pusher Configuration

Views: 4169

Comment by UAS_Pilot on July 28, 2012 at 8:54pm

Looks like i was modeled after the ScanEagle sUAS. I cant wait to start seeing reviews on the plane.

Comment by Kur on July 28, 2012 at 8:56pm

Thanks Chris for sharing.

Grab yours ASAP only 9 left in the stock. :)

Comment by Flying Monkey on July 28, 2012 at 10:23pm

...And the lawsuit from Boeing begins!

 

Seriously, this isn't the first ripoff... and they got sued into oblivion!  Overall, I'd give this two thumbs down... balsa wings, way to short a chord, ugly winglets...

Comment by Tony Heaton on July 28, 2012 at 10:38pm

That's a nice looking drone.

Comment by Rostislav Kolotov on July 29, 2012 at 2:23am

Looking forward to see first flight reports . Wing loading looks abit high so would be very fastflying.

Also remove Landing gear for hand launching should work good. Hope it flyes as it looks. HK is doing prety good job on brinning this FPV drone models to us.

Comment by Vladimir "Lazy" Khudyakov on July 29, 2012 at 4:18am

What a stupid plane...

Comment by Alex on July 29, 2012 at 5:34am

No, Thank's


Moderator
Comment by Robert Krogh (hooks) on July 29, 2012 at 2:47pm
Don't give Hobbyking credit for this one http://diydrones.com/profiles/blogs/new-model-for-diy-uav-project

I Think it's great hk try sell this. But it Will never be a winner like other foamies...
Comment by Javio on August 30, 2012 at 7:47am

I bought one some days ago and I am still waiting for it. I looked for flying reviews but I didn´t find any.

Comment

You need to be a member of DIY Drones to add comments!

Join DIY Drones

© 2014   Created by Chris Anderson.

Badges  |  Report an Issue  |  Terms of Service