I have a batch of LEA-4T chips on a small very professional developement board, I think its the same one as used in Ubloxes developement kit but now superceded by their LEA 5 and 6 units.
I can supply them at £50 (GBP) each plus P&P
They are wired to take serial i/o at logic levels ie ideal for micro interface, or add an external level convertor chip eg max232.
they come with antenna connector type smb. and have power regulators on board for powering from +5volts.
I have modified several for my own use to run and power off usb, as the usb pins are there on the chip but need wiring up. (its about 6 track cuts and 5 or six wire links from memory, but its quite tricky soldering onto the ublox chip leads as they are so close together.
I can supply them modified at £75 each. they will then run on either usb or serial i/o
I think the chips are no longer available from ublox unless you can prove you need them for retro fit on existing systems. I think the chips alone are about £50 in quantity anyway so my developement board complete with all its ancilliary cicuitry is a bargain!
I can supply all pinout details and some "fair use" backup help in getting it running .
Season Two of theTrust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.
Dyke's Comments
Comment Wall (2 comments)
Hi,
I have a batch of LEA-4T chips on a small very professional developement board, I think its the same one as used in Ubloxes developement kit but now superceded by their LEA 5 and 6 units.
I can supply them at £50 (GBP) each plus P&P
They are wired to take serial i/o at logic levels ie ideal for micro interface, or add an external level convertor chip eg max232.
they come with antenna connector type smb. and have power regulators on board for powering from +5volts.
I have modified several for my own use to run and power off usb, as the usb pins are there on the chip but need wiring up. (its about 6 track cuts and 5 or six wire links from memory, but its quite tricky soldering onto the ublox chip leads as they are so close together.
I can supply them modified at £75 each. they will then run on either usb or serial i/o
I think the chips are no longer available from ublox unless you can prove you need them for retro fit on existing systems. I think the chips alone are about £50 in quantity anyway so my developement board complete with all its ancilliary cicuitry is a bargain!
I can supply all pinout details and some "fair use" backup help in getting it running .
Regards
Anthony
Ok, thanks for your answer.
I´m interesting to buy one of the LEA-4T modified, but, Could you send me some photos?
My e-mail is: dyke2es@hotmail.com
I´m from Spain, The price is £75, Is the same price with the shipping cost to Spain?
Also I want to ask you about the precision that I colud get with this rtk low cost system.
I think it is depends on the antenna. Could you recomend me some antennas?
I was thinking to buy the ublox ann-ms antenna.
Do you know Where I could buy this antenna? For buy the 4t and antenna together.
Bye!!
You need to be a member of DIY Drones to add comments!
Join DIY Drones
Welcome to
DIY Drones
Sign Up
or Sign In
Or sign in with:
Social Networking
Top Content
ArduPlane 2.73 released
How to analyze a crash?
ArduVTOL
NEVER connect a Capacitor backup or voltage protector on APM board
HD video for UAV's
APM Copter 2.9.1.b has been released
DIYDrones Chat Feature Info
Arducopter Question
Arducopter 3Dr or Phantom
ArduVTOL - Wingcopter - Flight Report Nr.1
Contests
A list of all T3 contests is here.
Groups
Andropilot Users Group
182 members
3D Models
15 members
Japan ArduCopter Group
50 members
Telemetry over cellular …
247 members
German Ardu-Group
106 members
Advertisement