I would like to introduce the community to a mixer method used to fly complex aircraft in manual, fly-by-wire and autonomous modes.…
Blog Anything you want mixing 4 Likes Building Copters with Round Tubes - Stronger… Round tubes offer the following pros: handle twist better than square tubes. Thus for the strength, are far lighter. are more readily available (pipes, tubes, arrows, kite frames, golf clubs and st… Discussion Building Copters with Round Tubes - Stronger… 10 LikesI can't help but notice that allot of time in the discussions on DIY Drones is spent arguing. Clearly this saps the energy of this community. It is best never to get involved. That being said I…
Blog Dissent in an Open Source Community 9 Likes
When the ublox 6 series modules were released, I noted that the 6T and 6P modules provided access to the raw carrier phase…
Blog Proof of Concept test - Extremely accurate 3D 20 LikesJust wanted to share some progress on an iPad Ground Control Station app I've been putting together for a little while. Here's a quick introduction:…
Blog iPad Ground Control Station 25 Likes Arducopter 2.7 Auto-Flip
A while back Jose Julio built a simple state machine for doing copter…
Blog Arducopter 2.7 Auto-Flip 11 LikesThe PX4 team is pleased to announce early availability of the PX4 autopilot platform, with hardware available immediately from 3D Robotics. …
I wanted…
Blog AutoQuad ESC32v2 20 LikesArduCopter now has experimental geo-fencing support, thanks to Andrew Tridgell's superb geo-fencing code for…
Blog Geo-Fencing for ArduCopter - Keep your copter 9 Likes A South Carolina Arducopter Project
There are a lot of home-brew parts in this machine (no fooling, really).…
Blog A South Carolina Arducopter Project 4 Likes
Season Two of the Trust Time Trial (T3) Contest has now begun. The fourth round is an accuracy round for multicopters, which requires contestants to fly a cube. The deadline is April 14th.1298 members
692 members
7 members
48 members
24 members
© 2013 Created by Chris Anderson.
Powered by
