Gender
Male
About
Location
christchurch
Please tell us a bit about your UAV interest
Aerial photography
Hometown:
christchurch
Activity Feed
"Disk motors traditionally are quite low amps compared to a 28 or 35mm"
"On 3s I think 30A will be more than ample. 4s would use less.
My 950kv 28mm motors push 1.25kg at 4S and pull 17A"
My 950kv 28mm motors push 1.25kg at 4S and pull 17A"
"I find with mine If I'm hovering above say 2m when I click alt hold it rises up a few meters then stops. If under 2m it drops down and lands. Its a bit of an art as it doesn't respond rapidly to throttle input. Definitely not how I expected it to…"
"Hi Goncalo *my keyboard doesn't have that c sorry.
That is probably normal behaviour.
In ALT hold mode the throttle becomes altitude control. So switching modes doesn't guarantee it will hold its current altitude but rather the altitude relavent to…"
That is probably normal behaviour.
In ALT hold mode the throttle becomes altitude control. So switching modes doesn't guarantee it will hold its current altitude but rather the altitude relavent to…"
"You have to set up the code via arduino ide not mission planner. updates however can be done via mission planner.
Do not do as suggested before which is basically a hacked quad. Yes it will fly by not as stable and smooth as what is called the…"
Do not do as suggested before which is basically a hacked quad. Yes it will fly by not as stable and smooth as what is called the…"
"Drone Savant, if not APM, what platform are you working with at the moment?"
"Which country?
In NZ any pilotless aircraft used commercially becomes a UAS, certification starts with approval by the director of our CAA (like the USA FAA), one of the general requirements is to have sat the exams for. PPL. Only 3 nz operators…"
In NZ any pilotless aircraft used commercially becomes a UAS, certification starts with approval by the director of our CAA (like the USA FAA), one of the general requirements is to have sat the exams for. PPL. Only 3 nz operators…"
