Gender
Male
About
Location
Darmstadt
About Me:
Mikrokopter / Arducopter User
Please tell us a bit about your UAV interest
Contructing max-lift max-distance UAV
Activity Feed
"Hi Wolke,
your suggestions were exactly what i tried before. I will try this tonight with an X8R at home and see if it works - if it does, then it's the X4R, if it doesn't, then it is my compilation etc.
In case it is the X4R, i could send you one…"
your suggestions were exactly what i tried before. I will try this tonight with an X8R at home and see if it works - if it does, then it's the X4R, if it doesn't, then it is my compilation etc.
In case it is the X4R, i could send you one…"
"Hi Wolke,
i still have issues getting this to work with the X4R receiver which is much smaller than the X8R (my models partially do not have space for the X8R) - the issue is here that the receiver itself internally uses A2 which causes a conflict.…"
i still have issues getting this to work with the X4R receiver which is much smaller than the X8R (my models partially do not have space for the X8R) - the issue is here that the receiver itself internally uses A2 which causes a conflict.…"
"Hi Everyone,
sorry for asking again - has anyone tried this code with the X4R receiver ? Unfortunately, i can not figure out what to change to make it work. I would be very happy if someone could give me a hint.
Cheers
F."
sorry for asking again - has anyone tried this code with the X4R receiver ? Unfortunately, i can not figure out what to change to make it work. I would be very happy if someone could give me a hint.
Cheers
F."
"My pleasure - you are welcome. I was just trying to help you - in fact, the web-site linked seems to answer most of the questions except the one "has someone tried this" -but assuming the manual has been written with some testing, i would expect it…"
"Hi Ian,
in the hope that someone helps me with my problem above, i try to help you a bit.
Basically, you need e.g. Arduino 1.0.6 (you can download the non-installation version if you are using a newer arduino software for something else). - In…"
in the hope that someone helps me with my problem above, i try to help you a bit.
Basically, you need e.g. Arduino 1.0.6 (you can download the non-installation version if you are using a newer arduino software for something else). - In…"
"Hi !
I am trying to use this togehter with the X4R-SB (which i use with a SBUS to PPM adapter) as i can not fit an X8R in my craft.
Unfortunately, i get really fluctuating values on A2 (the X4R already has an analog interface for the A2-Value…"
I am trying to use this togehter with the X4R-SB (which i use with a SBUS to PPM adapter) as i can not fit an X8R in my craft.
Unfortunately, i get really fluctuating values on A2 (the X4R already has an analog interface for the A2-Value…"
"Hi !Just for Info: In case you upgrade the firmware and use Telemetry, you will likely end up with a broken mavlink connection "No heartbeat received" -
The problem is that the original APM firmware of the cheerson was modified and they use RX2/TX2…"
The problem is that the original APM firmware of the cheerson was modified and they use RX2/TX2…"
"Ok - Question already resolved. Similar problem here:
Discussion:http://ardupilot.com/forum/viewtopic.php?f=22&t=9534Firmware:ht... tool for dummies:http://www.hobbytronics.co.uk/arduino-xloader"
Discussion:http://ardupilot.com/forum/viewtopic.php?f=22&t=9534Firmware:ht... tool for dummies:http://www.hobbytronics.co.uk/arduino-xloader"
Hello Everyone,i am trying to get Telemetry to work on Port RXD2 / TXD2 - (Atmega Pin 12 / 13) for Telemetry and Mavlink instead of RXD0/TXD0.Unfortunately, for several reasons, i can not use the default telemetry port and really need to use Pin…
"Hallo Rainer,
ich habe den Copter mal ungefähr mit ECALC durchgerechnet - mein erster Eindruck war: Viel zu viel Leistung bzw. KV für das Gewicht - aber interessanterweise ist dem scheinbar doch nicht so. Es fehlen aber ein paar Angaben: Genauer…"
ich habe den Copter mal ungefähr mit ECALC durchgerechnet - mein erster Eindruck war: Viel zu viel Leistung bzw. KV für das Gewicht - aber interessanterweise ist dem scheinbar doch nicht so. Es fehlen aber ein paar Angaben: Genauer…"
"Hi !
I can share your frustration. After a software bug leading me to go to the hospital and getting my arm put together again, after many many crashes etc. i went away from arducopter. - Up to now, i did not regret it. - I switched to the "three…"
I can share your frustration. After a software bug leading me to go to the hospital and getting my arm put together again, after many many crashes etc. i went away from arducopter. - Up to now, i did not regret it. - I switched to the "three…"
Hello Everyone,i have just seen the release of the new Sony Cameras for Smartphones (QX-10 + QX-100) - isn't this almost what we would need to make the perfect camera for a copter ?-> http://www.sony.co.uk/product/dsc-qx-series/dsc-qx10Remotely…
"Hallo Michael,
den Zusammenhang mit der Software kann ich nun nicht herstellen - ich hatte allerdings in der Vergangenheit das Problem, dass bei hohem Stromfluss das Magnetfeld der Leitungen den Kompass beeinträchtigt hat. - Kann es evtl. daran…"
den Zusammenhang mit der Software kann ich nun nicht herstellen - ich hatte allerdings in der Vergangenheit das Problem, dass bei hohem Stromfluss das Magnetfeld der Leitungen den Kompass beeinträchtigt hat. - Kann es evtl. daran…"
Hello Everyone,after having bothered the forum for quite a bit and quite some issues setting the copter up (took months, before it worked), many many crashes and broken equipment, i got one arducopter flying. - Unfortunately not for long as it…
