Gender
Male
About
About Me:
electrician I.T robotics di.fm --> hardcore
Please tell us a bit about your UAV interest
lmao....coz its the best thing going :D
Hometown:
AUSTRALIA !!@!#!@@@!@!
Activity Feed
"How small of a waypoint did you make ? Reset all automatic settings because manual works fine, change waypoint to larger scale. Ive had this problem before forget how i fixed."
"@emile
you just have make a mission up like add a few dots make a sqaure in mission planner and that should fix your hold problem"
you just have make a mission up like add a few dots make a sqaure in mission planner and that should fix your hold problem"
"Perhaps wen u choose that certain option with loading parameters there are none to load ? What about saving some paras first then load ? Just sm ideas."
"Hi emile, maybe update mp....im not at home so cant see...do u go online first ? Or r u disconnected ?"
"And im using a power module to power everything. My battery is big...3300mah...3s1p.... but shdnt matter with the module to convert it down."
"My transmitter is turnigy 9x"
"And long time no see thomas how have u been?"
"Before i put the ardupilot on i tested the car out and it flew ....so i thought with the arupilot i cd control the speed. But nothing"
"Apm channel is normal...1 and 3...i got the mode 1 transmitter ...left stick is throttle center stick right stick isnt free moving u can move and it stays ."
"I havnt tried auto...only manual. Iv edited the pitch curv to enable the 3 mode switchon turnigy.iv edit the curve on both but stil nothing...the speed does ramp up a bit. But really quick.dead band nt sure bout that....calibrated esc to transmitter…"
Ive tried lowering throttle curve....ive tried adjusting parameters...but nothing seems tonslow down my lil turnigy car.just a lil movement of my stick and she flys....maybe its just the actual car being light and fast motor but it would be nice to…
"Im only using the pitch channel to control a servo on outside .instead of pitch for a plane."
My rover is setup usual config...1.3 throttle steer....my issue is pitch..im trying to make pitch input 2 ardu...and output 2..make it control a servo...it does work up until the ardupilot is booted up and no more led flashing...so its something to…
"Hi all. Quick question does the learn function allow you to make waypoints without using gps positioning.eg. hold forward 5 seconds .play. returns to start and move forward for 5 seconds."
"well failsafe works....but having another issue now.... stupid robot wateva mode its in , manual, learning it just keeps moving forward this must b some parameter coz iv done reset of radio config .....any thoughts ??"
"i believe ive tried to disable this parameter for at least a week, with recoding the entire "failsafe" file and then upload to ardu2.5
but no luck...im pretty sure it was with an older version unless if anyone can confirm a fix. that when you power…"
but no luck...im pretty sure it was with an older version unless if anyone can confirm a fix. that when you power…"
