Gender
Male
About
Location
santiago
About Me:
I am an agronomist that since a couple of year have gotten very interested on drones, Quads and UAV and how to extract its value for Ag/Fruit and othe agricultural areas in Chile. I have worked for more than 25 years in international Solution Corp.
Please tell us a bit about your UAV interest
I am still looking to put in place an offer for the Chilena market, to offer the value of using UAV to get information I or someone else could manage to produce the information the growers could use to spend less money or use the products in the best way or beggin the harvest in the correct place, etc.
Hometown:
santiago
Activity Feed
"Hello, I benn using a pair of these 900+ units with great results, even when I only use one in my Iris+ for Mapping I get a lot more than the normal 3DR Radios can give me, I will love to Beta test any sample, Cristian"
"Hello,
I am looking to increase my actual range of telemetry in my IRIS+ , today I can get from 100 to 300 mts, depending on the day and the obstacles, If I add a RFD 900+ connected to my Notebook in the field and mantaining the 3DR stock telemetry…"
I am looking to increase my actual range of telemetry in my IRIS+ , today I can get from 100 to 300 mts, depending on the day and the obstacles, If I add a RFD 900+ connected to my Notebook in the field and mantaining the 3DR stock telemetry…"
"Yes I have used the NDVI, NIR and the RGB mapir ones with great results"
"Yes I support this, also will try to change the orientation of the strips to the longer side, if the distance is less than 500-600 mts, i would also lower the speed of the Iris+ to get the overlapping at leas 70/70%
Good luck"
Good luck"
"Hello, I have seen using multirotors to apply polen in Pears in my country, Chile, as a dry product, so I undertand it can be done."
"..or the Solo moves according to the the degrees in the ginball so they will not appear on frames..., today if they both have processors they are capable to comunicate and do so..."
"This Y6 was used whrn it got to my hands, had around 8 months of use but not abuse, I was able to use it a couple of times before in manual mode not in auto, even this day I use it in manual first with no problems, it was relativelly short, take of…"
"...no respond, I even tried to set RTL with no result....it just continue the same way it was moving into the woods..."
"Uff , that is too much.....how to know all that before initiating the mission, is that normal, what could have done different, vibrations.... In all the bird or in the motors..., I wish I could handle the logs as you do"
"Yes especially with bad solar storms going on....
I have ArduCopter V3.1.5"
I have ArduCopter V3.1.5"
"I am not sure, HDOP was high , over 2,3.."
Hello,Just have my first crash with my Y6 RTF...do not know exactly what happens, I INITIALLY MAKE TWO SMALL FLIGHTS IN LOITER AND IN sTABIL, with no problem, the same for launching and returning back to the soil, then I load a small mission ,…
"Hello,Just have my first crash with my Y6 RTF...do not know exactly what happens, I load a small mission , read it to check it was inside correctly, then went to auto launch it took off went strait to around 50 mts and just moved to the oppossite…"
