Gender
Male
About
Location
Clarksville, TN
About Me:
IT Specialist Member of KY-TN UAV Group.
Please tell us a bit about your UAV interest
I Have always been interested in robotics, R/C Airplanes, and over the last 12 years UAV's.
Hometown:
Orange City, FL
Activity Feed
"Is anyone have problems with futaba r7008sb receiver? Running firmware 3.5 I had no issues but now after upgrading to 3.6 I get a no receiver error. Downgraded and error went away. Also after going back to 3.5.75 can not configure the wing control…"
Been flying RC for several years and Multirotors for 3. I have read a lot of post where when people say flight performance change when they fly over water. I have thought about this and I remember one thing my flight instructor taught me about…
"Were you able to figure out the ROI feature? I have complete control of the gimbal when flying manual but in a auto mission the ROI feature does not tilt the camera. Its mounted in a Iris+"
"What settings did you have the GP on? PIX4D?"
"Excellent! This is a win-win. It lets me know the areas I can work on to improve my input. I'll try a little more waypoint averaging and check and compare elevation settings. I am also testing a 2 axis gimbal to keep the camera orientation more…"
"Not sure what the team at mapsmadeeay.com did yesterday but I started getting emails that my map was processing, then finished and processing again. I think this was a total of 4 times. Went in to look at the map this morning there are significant…"
"Glad it was of some use. I used the Pixhawk FC and trigger on distance with a Canon S100 for this flight then use the log to geotag the pictures. The data logger sounds promising for the other flight controllers like DJI that don't allow you to get…"
The above picture was done with Skycatch online processing.With the different cloud processing out there for maps I have tried several of them with different results and wanted to write what I have experienced. I ran a data…
"Hope this helps
My Setup
S100 CHDK Script:https://github.com/diydrones/ardupilot/tree/master/Tools/CHDK-Scrip...
Follow Flight Planning in the manualhttp://3drobotics.com/wp-content/uploads/2014/12/AeroM-Operation-Ma...
70% Frontal overlap60% side…"
My Setup
S100 CHDK Script:https://github.com/diydrones/ardupilot/tree/master/Tools/CHDK-Scrip...
Follow Flight Planning in the manualhttp://3drobotics.com/wp-content/uploads/2014/12/AeroM-Operation-Ma...
70% Frontal overlap60% side…"
"Another aerial map of a construction site that has sat for several years without progress. This is also a good representation of how satellite images are out of date online. This was flown on March 12, 2015. In comparison to the map I posted the…"
"Finished Map from Sunday afternoon flight my Skywalker 2013 w/ Pixhawk FC mapping 446 acres in 41 min. Flight was at 100m at 15 m/s taking a photo every 2.4 seconds for 975 pictures. Average GSD is 3.5cm/ 1.4in. Camera S100 Processing time 6hours 3…"
"I have been using the TAU 2 324 to track wildlife. I find it more than capable to do the the job. Here are some of the videos if interested in seeing it in action. https://www.youtube.com/playlist?list=PLfOneiFSbHfVnId8G_JJiHWvb7eZP..."
"Running 3.2 and was doing a video range test. Ended up going to the end of radio range and when it went into failsafe the quad flipped but recovered. I cant find anything so I am asking for help.
Thanks for any help/ advise "
Thanks for any help/ advise "
"With everyone talking about calibration and ways to do it does anyone have a set of ranges we should be looking for? There are many ways to manipulate getting numbers but which ones are right? Is it still anything below 250 is good?"
"Just loaded 3.2. Did the comp calibration and the results are -72 -2 -123 and 69 -230 -450 Is this normal? the numbers seem to be all over the place. Turned off auto on the calibrate and had around 2100 points.
Thanks"
Thanks"
"Jono he has and the support team is great. I was just asking in case I missed something. Jeremy gave me some things to try when I get home. "
