Gender
Male
About
Location
Barcelona
About Me:
beginner bulding my first Drone
Please tell us a bit about your UAV interest
new in this world and having new hobby.
Hometown:
spain
Activity Feed
"Hi Aldo o Hola,
I opened mu Emax 4in1 of 30A and it's little differents than yours i don't know recognise those components
Here i attach a photo of mine
Can you help me?image.jpg"
I opened mu Emax 4in1 of 30A and it's little differents than yours i don't know recognise those components
Here i attach a photo of mine
Can you help me?image.jpg"
"Hi Aldo,
Do you say if remove these two resistors, then emax will be compatible with pixhawk?
Do you test it? do you have any video or something?
thanks"
Do you say if remove these two resistors, then emax will be compatible with pixhawk?
Do you test it? do you have any video or something?
thanks"
"Any solution after few months? because i can't do anything... I'm think that i will change my emax 4in1 by qbrain..."
"Hi Tim,
Thanks for reply.
I try to do this that you told me, but i only listen long tune of pixhawk and that's all. Here you have video:
https://youtu.be/HmZwVNINQOo
In video you can see that i don't switch safety correctly in second time to plug…"
Thanks for reply.
I try to do this that you told me, but i only listen long tune of pixhawk and that's all. Here you have video:
https://youtu.be/HmZwVNINQOo
In video you can see that i don't switch safety correctly in second time to plug…"
"Hi Dene again,
Today I try to configure again turnigy now, i can move by all flight modes in mission planner, so i think that turnigy now is correct configured.
The problem continue, when i try to make calibration of ESC by pixhawk, and don't have…"
Today I try to configure again turnigy now, i can move by all flight modes in mission planner, so i think that turnigy now is correct configured.
The problem continue, when i try to make calibration of ESC by pixhawk, and don't have…"
"I forgot say that when i plug directly each ESC to ch3 of receiver, then turn minimum throttle, plug battery, switc on turnigy and throttle to max then each motor works"
"Hi Dene,
First of all thanks for help. I have some doubts about your explanation.
When you say arm the controllers what do you refer? How i can do this arming?
Today i decided to restore pixhawk and turnigy 9x and start again from the beggining.
To…"
First of all thanks for help. I have some doubts about your explanation.
When you say arm the controllers what do you refer? How i can do this arming?
Today i decided to restore pixhawk and turnigy 9x and start again from the beggining.
To…"
"Hi,
I'm mounting my first quadcopter with this hardware:
- Pixhawk clone
- 4 sunnysky 980KV
- Emax 4 in 1 ESC
- Turnigy 9x version 2 with receiver
- ppm encoder sum
I follow all videos from your website and can't make work the 4 motors. I try to…"
I'm mounting my first quadcopter with this hardware:
- Pixhawk clone
- 4 sunnysky 980KV
- Emax 4 in 1 ESC
- Turnigy 9x version 2 with receiver
- ppm encoder sum
I follow all videos from your website and can't make work the 4 motors. I try to…"
"HI,
I write to you because i have a pixhawk clone in my quadcopter that i'm building and turnigy 9x receiver and don't fly.
I saw that you had a similar problem and i think that you solved.
Do you speak spanish?
Maybe can you help me?
thanks"
I write to you because i have a pixhawk clone in my quadcopter that i'm building and turnigy 9x receiver and don't fly.
I saw that you had a similar problem and i think that you solved.
Do you speak spanish?
Maybe can you help me?
thanks"
