Gender
Male
About
Location
Ridgecrest, CA
Please tell us a bit about your UAV interest
sUAS Instructor Pilot
Hometown:
Harbor City
Activity Feed
"I have seen this behaviour when using do_digicam commands while flying survey grid missions. The do_digicam command is a waypoint that follows reaching the calculated camera triggering waypoint....
My $.02"
My $.02"
"Yes Chris I do it all the time!
http://monarchmakers.com/index.html
Slightly more efficient, we have noticed a 5-10 percent increase in flight times using this method and as you said the c clip popping off doesn't down the bird!
Cheers!
Scott…"
http://monarchmakers.com/index.html
Slightly more efficient, we have noticed a 5-10 percent increase in flight times using this method and as you said the c clip popping off doesn't down the bird!
Cheers!
Scott…"
"Do you have a Geo Fence enabled? I you fly outside an enabled Geo Fence it will do a RTL and depending on settings will loiter above "Home"...
Scott"
Scott"
"It took me 1500+ data points on my 15+ lb copter!
The points need to be covering all areas of the sphere too!
Needed to watch where it was collecting on the display carefully."
The points need to be covering all areas of the sphere too!
Needed to watch where it was collecting on the display carefully."
"It works!
Nice job everyone!
Now, back to work for me!"
Nice job everyone!
Now, back to work for me!"
"Okay guys!
Loaded Mission Planner "beta" and did a compass calibration, it collected 2050 points on a 15 lb Quad and continued boy am I pooped! the sphere was well populated but it still showed the dreaded needs more points message. I just can't…"
Loaded Mission Planner "beta" and did a compass calibration, it collected 2050 points on a 15 lb Quad and continued boy am I pooped! the sphere was well populated but it still showed the dreaded needs more points message. I just can't…"
"Ah, now I see!
Thank you Michael!
I'll let you know!"
Thank you Michael!
I'll let you know!"
"+1 here too!
I've resorted to manually adjusting the focal length of the camera to fool it into giving me the correct Field of View for the Altitude I fly based on the FoV calculator that Tetracam supplies with their PixelWrench software. We had…"
I've resorted to manually adjusting the focal length of the camera to fool it into giving me the correct Field of View for the Altitude I fly based on the FoV calculator that Tetracam supplies with their PixelWrench software. We had…"
"I will test the Beta if you like, where can I find it?
Post a link please!"
Post a link please!"
"I have had a better upperbody work out today than I've had in a few years twirling and dancing with a 15 lb quad! 3000+ points and an almost solid sphere, really!
Is anyone working on this or should we all go back to 1.30?"
Is anyone working on this or should we all go back to 1.30?"
"The Battery that comes with a 3DR Y6 is a 4S, Right Chris?
https://store.3drobotics.com/products/3dr-rtf-y6-2014/ "
https://store.3drobotics.com/products/3dr-rtf-y6-2014/ "
"Yes Michael, I actually am a Tetracam dealer (CalUAS) an have a good working relationship with the guys there.
I went there and asked them that, I actually thought I'd found an error in there spec sheet, like maybe the focal length was really 28.43…"
I went there and asked them that, I actually thought I'd found an error in there spec sheet, like maybe the focal length was really 28.43…"
"I am having the same problem even with MP 1.2.99.
I fly the Tetracam ADC Micro for crop NiR NDVI analysis. I used the preconfigured Tetracam ADC Micro that showed up in the camera list, checked all of the specs against the Tetracam website's spec…"
I fly the Tetracam ADC Micro for crop NiR NDVI analysis. I used the preconfigured Tetracam ADC Micro that showed up in the camera list, checked all of the specs against the Tetracam website's spec…"
"Found the short term fix on the other forum!
http://ardupilot.com/forum/viewtopic.php?f=12&t=5145
"I have the same issue, I think this should be fixed by the developers but in the meantime you can recover the tabs by:Uncheck the Advanced…"
http://ardupilot.com/forum/viewtopic.php?f=12&t=5145
"I have the same issue, I think this should be fixed by the developers but in the meantime you can recover the tabs by:Uncheck the Advanced…"
I updated my MP yesterday and was surprised to see I have a problem with the new version.When I create a flight plan using Auto WP and the Survey(Grid) mode.The first time I use it after the update everything works just like it has in the past, I…
"Very good!"
