"well that's bit sad if its only 8 my diy uhf module has 16 with mavlink"

"Hi 
I have an issue it move's so fast it tips over in did try to set the max Rate in yaw gain but it makes no difference
Thanks Colin
https://youtu.be/avnlnGXJ-is "

"Thanks for that i had one some time back its only plastic gears  and they never stop at the same spot Sebastian Schürmann said:
GWS builds a sailwinch servo that does 1T or 360°. GWS S125 1T"

"No you Please Google Continuous rotation servo not after one 
i need one that goes past 180 not Continuous rotation
Anthony Verloop said:
fred flintstone said:Hi all anyone got an idea of a servo that goes past 180 Deg   



Please Google…"

"Hi all anyone got an idea of a servo that goes past 180 Deg   "

"can some post there pram file for 1.0 to look at i must be missing something "

"thanks i do i cant get 1.0 to work on my pixhawk works fin on 0.8 Jeff said:
I just compiled v0.8.0 for the pixhawk if anyone needs it, since it is no longer available."

"well that counts me out then 900x  i not going to up date all 7 900+ i have bummer kent Martin said:
Short answer , no.
The hardware is capable but old modems would need mods to keep up with x versions and they are hard to change. There is an ever…"

"don't connect tx line out of the OSD  you only need TX into the OSD if you have 2 TX the controller will get confused in who it is talking to
Jeremy Stromsoe said:
Jamie, did you figure this out?  I'm also running MinimOSD and it works fine with…"

"yes there is have look here

https://www.rcgroups.com/forums/showthread.php?2037442-Ultimate-LRS...(using-2-OrangeRX-1W-TX)&perpage=100"