About Me:
Techno Shiznit
About
Please tell us a bit about your UAV interest
Steppin out into tha funky world of whirly thangs
Hometown:
LA
Activity Feed
"No, absolutely do not disable the pre-arm checks. Look in the GCS when you try to arm, it should tell you the reason it's not arming."
"Hi, have a look here:
http://goodrobots.github.io/maverick/current/#/modules/vision?id=vi...
and here:
https://github.com/maartenvds/libseek-thermal"
http://goodrobots.github.io/maverick/current/#/modules/vision?id=vi...
and here:
https://github.com/maartenvds/libseek-thermal"
"Good luck with your book, it looks interesting and a useful resource. Ignore idiot trolls. You could post it on discuss.ardupilot.org as well, few people come on this site anymore."
"Cool!"
"RFD900 isn't legal to use in the UK is it?"
"I think they all have the laser projection, but that's only really useful indoors or at night outdoors (have you tried outdoors in the evening/night? would be fascinating if you get a result!)
This is interesting:…"
This is interesting:…"
"Interesting, the outdoor performance is way, way better than the R200 so that's positive! Interesting to see how at the end of the video the two people in the field seemed almost invisible in the depth map yet the copter flying around was quite…"
"Really terrible webpage with virtually no information about the results or the technologies involved. I'm very interested but none the wiser."
"@Patrick Poirier I wasn't meaning to have a go at you personally - I was just speaking my 2c about the action itself. I have the utmost respect for you and all the cool projects you have done - you're probably more of a true DIYer than anyone…"
"@ZTW Brushless ESC - *&^% off and take your spam elsewhere, it's bad enough you continuously spam the blogs here
I've followed the URUS stuff a bit on the ardupilot forums in the past. It's interesting stuff, a little esoteric and way out there and…"
I've followed the URUS stuff a bit on the ardupilot forums in the past. It's interesting stuff, a little esoteric and way out there and…"
"Tantamount to censorship. Very uncool for an 'open' project."
"Hey, it's actually super simple. Take a normal usb2 cable, cut in half, take the small plug half and strip the outer sheath where you cut it. You'll end up with something like this:…"
"Most of us are amateurs-in-learning :) (I certainly am). You can buy a 5v BEC from any drone/hobby shop, as long as it does 2-3a that will take care of anything a raspberry is likely to consume. A lot of PDB (power distribution boards) for your…"
"Firstly the telem2 port in that diagram is a lower power port, the telem1 port is 'high power' as detailed here:
http://ardupilot.org/copter/docs/common-telemetry-port-setup-for-ap...
but can still only handle up to max 1a and is still not a good…"
http://ardupilot.org/copter/docs/common-telemetry-port-setup-for-ap...
but can still only handle up to max 1a and is still not a good…"
"That's terrible insane advice - never power the raspberry from the pixhawk. That's an error in the docs and should be fixed. Power the raspberry from a BEC or USB, separately."
