ArduPilotMega 2.x hardware (984)

Discussions Replies Latest Activity

Programming APM2.8 with ArduinoIDE from Ardupilot, Yaw is malfunctioning

Hello, I'm trying to do an autonomous flight indoors and I decided to program my APM 2.8 with a custom code using the AP library, when I te…

Started by Jonatan Josue Murcia Acuña

0 Oct 14, 2017

APM to FrSky with or without extra hardware

Hello, I have seen quite a few threads about APM telemetry through MAVLink to a FrSky receiver. There are different solutions with differe…

Started by bnwgraaf

0 Sep 11, 2017

APM 2.5 won't arm!

The problem that I had before is sorted. Although now I'm stuck again. I've managed to manually calibrate the ESC's, although now this iss…

Started by Kris Hope

13 Sep 3, 2017
Reply by rudyh

check port settings

Hellow,  I al new to the drone world, I am building my own drone, I have a APM2.5 and when I try to upload the firmware, i get the error: "…

Started by Sander De Sutter

1 Aug 31, 2017
Reply by John Fitter

Need sensors attached for stabilize mode?

Hi folks, I am looking at using an APM2.5 i have spare from an old quadcopter to put into one of my planes. I am looking at only using the…

Started by Finnius

1 Aug 31, 2017
Reply by John Fitter

Программирование APM2.8

Хочу начать от применяемой версии Windows Чаще всего проблемы с установкой драйверов возникают с подлинностью системы.  Windows имеет скры…


0 Aug 5, 2017

Looking for APM 2.5 controllers - the purple circuit

Hi I am looking for 2 of the old apm2.5 model purple circuit board controllers for a project i am working on - i would be happy to pay a re…

Started by Al French

2 Jul 23, 2017
Reply by Al French

Is APM 2.0 still usable?

Hi all, I was one of the early users of jDrones and APM, but I had some personal problems and didn't do anything for years. Now I'm back bu…

Started by Simone Chiaretta

4 Jul 23, 2017
Reply by Jack Chomley

Upgrade a MK into a Arducopter!

Hello guys! I have a Hexakopter MK, and I want to upgrade to Arducopter. I want to know if I can use the BL-Ctrl 1.2 (MK's i2c ESC) with th…

Started by Diego Fdez.

21 Feb 23, 2017
Reply by Alessandro Scarabelli

Controlling APM with MAVLINK protocol

Hi everyone, I'm new here and I'm planning to start a new project with Ardupilot (Copter). For this project I'm planning to use an APM 2.6…

Started by Sergi Torrabadella Faucon

0 Feb 16, 2017


© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service