Batteries/Chargers/Distribution/Sensors (202)

Discussions Replies Latest Activity

Battery Selection For Quadcopter

Hi there everyone. I have a 2205 2500 KV brush less motor for my quadcopter, that requires 12 V for operation. The batteries available are…

Started by hassaan

0 yesterday

Battery packs for heavy UAVs

We manufacture custom battery packs for heavy UAVs using top quality cells made by Panasonic. www.uavfpvbattery.com

Started by CMΞC

4 Apr 27
Reply by Nikola Rabchevsky

Current and Voltage Sensor

Hey out there. Wondering if anyone out there has a cirucit diagram for a 100 amp current sensor and voltage sensor. I have a drone that I w…

Started by Richard Gardner

1 Mar 18
Reply by chengjulian

Safety First: 100A & 200A Hall Sensor with BEC for Pixhawk / APM

After I had a few problems with the standard power module from 3DR and the ones from Hobbyking, like falling off resistors (overheated) and…

Started by Christian Mauch

116 Feb 27
Reply by Darshan Jain

Batteries

I would be interested to share what others are using and how they have their power systems set up and what they find does and doesn't work.…

Started by John Campen

20 Jan 23
Reply by Morgan Johnson

Dual System Redundant Supply Parallel Question

Wondering if i might ask those of you with far superior electrical knowledge than me (thats most of you lol) a question... I'm building a…

Started by Windjimes

21 Jan 17
Reply by Marco Riccardo Napoleone

Running 2 'identical' batteries in parallel

Just found a Deans Y connector for connecting 2 batteries in parallel.  I have slight concerns whether this is safe.  I have 2 identical ma…

Started by Andy Baker

13 Jan 17
Reply by Thomas Butler

Power Distribution Board Selection

Need some assistance on PDB selection. Going to be running T-Motor U3 700KV motors with 40A ESC's. What will be a good distribution board f…

Started by Mergan Chetty

10 Dec 8, 2018
Reply by Hugues

Battery Failsafe (mAh) settings.

I have a 4000mAh 3c Turnigy Nano-tech Battery, and I am confused about what to put in the "Battery Failsafe (mAh)" setting. There is nothin…

Started by Sandy Sound

3 Dec 4, 2018
Reply by Keith Burgess

Powering a device from pixhawk

Hi All - sorry if this is a simple question but I need to power a small LORA radio board from my pixhawk. I need 3.3v and I'd like to be ab…

Started by Adam Kelly

6 Nov 12, 2018
Reply by Adam Kelly

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service