Flying/Tuning Mulitcopters (619)

Discussions Replies Latest Activity

unstable roll axis

Hello all, the hexa i am flying with now is 1600mm, around 7kg without payload and 12kg with payload, and it is not stable at the roll axis…

Started by Shian Lee

1 Mar 6, 2018
Reply by Brian Riskas

first built quad

Hi. I have just built my first quad having installed Pixhawk on board, Have just flown it for the first time in my small garden. It lifted…

Started by kenneth scotney

1 Feb 8, 2018
Reply by iSkyMaster

Auto-retracting tether for testing large octocopter

Anyone have experience with a relatively long (~20 ft) restraining tether that will keep light tension on the line to minimize risk of tang…

Started by George Finlay

4 Jan 23, 2018
Reply by GocGoc

Why did the chute DEPLOY?

I built a copter for a friend, who was out flying a mapping mission in auto. Just prior to the last waypoint the chute deployed. After revi…

Started by Doug Andriuk

3 Jan 13, 2018
Reply by Greg Fletcher

Yaw angle be affected by motor?

I have make a drone, and I have a problem now. My drone sometimes rotates along z-direction, I think yaw angle is incorrect when it fly. I…

Started by Lacdires

0 Dec 2, 2017

Toilet Bowl effect in loiter even after calibration

Hello there,I'm trying to get an octocopter I built to perform well enough on Loiter. Stabilize always works really well, but loiter someti…

Started by Joel

5 Nov 16, 2017
Reply by Joel

Tarot 960, Anyone getting good flight times ?

Set up is getting limited flight times and I only just get in the air and start to set up my shots and it is coming down. Please throw me a…

Started by Michael

0 Oct 16, 2017

Octo overshoots Yaw by about 80% PID's don't seem to make any difference???

Vehicle: octo running arducopter latest build 3.5.3. frame 910mm 6kg without payload. I've just swapped over to a Pixhawk 2 FC and i've not…

Started by Nathaniel McMahon

1 Oct 12, 2017
Reply by Nathaniel McMahon

mission planner 1.3.5 & joystick control

Hi friends, Many discussions about this subject.... But no one about EXPO problem.... I fly with a joystick on USB port com in W7. Every th…

Started by alain

0 Oct 11, 2017

mission planner 1.3.5 & joystick control

Hi friends, Many discussions about this subject.... But no one about EXPO problem.... I fly with a joystick on USB port com in W7. Every th…

Started by alain

0 Oct 11, 2017

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service