Nick Arsov's Discussions (34)

Discussions Replied To (34) Replies Latest Activity

"Hi Levi, Before replacing the MCU, first check the 5V LDO ( sot23-5 ). If it is dead…"

Nick Arsov replied Jun 4, 2012 to Circuitry ( 328p) fried due to magnet?

22 Jun 5, 2012
Reply by VIA UC

"Hi Jbabio, If you don't want to make an additional summing amplifier, have a look he…"

Nick Arsov replied Jun 4, 2012 to Current sensing (safely) for Heavy Octo?

27 Oct 12, 2017
Reply by Harry Courter

"Hi Levi, If the outer metal ring of the magnet hasn't shortened some pins....the mag…"

Nick Arsov replied Jun 3, 2012 to Circuitry ( 328p) fried due to magnet?

22 Jun 5, 2012
Reply by VIA UC

"Hi James, Yes right - Vf=forward voltage across the LED, Vcc is your power voltage.…"

Nick Arsov replied Jun 2, 2012 to LEDs (big, serious LEDs) brightness control

14 Jun 2, 2012
Reply by Dane

"Hi Boris, The connections you have to make are: 1. 5V side ( 5V electronics ): a/ au…"

Nick Arsov replied Jun 1, 2012 to PPM input logic level?

9 Jun 13, 2012
Reply by Ravi

"Hi James, A few simple rules when driving LEDs: 1. DO NOT overcurrent the LEDs. Othe…"

Nick Arsov replied Jun 1, 2012 to LEDs (big, serious LEDs) brightness control

14 Jun 2, 2012
Reply by Dane

"Hi Boris, Just buy a simple level translator like this one - https://store.diydrones…"

Nick Arsov replied Jun 1, 2012 to PPM input logic level?

9 Jun 13, 2012
Reply by Ravi

"Hi Richard, Watch carefully this video - https://www.youtube.com/watch?v=I_NU2ruzyc4…"

Nick Arsov replied Jun 1, 2012 to How do you Solder Pin headers on Ardupilot related sensors, pitot, 3dr etc

7 Jan 17, 2013
Reply by Richard

"Hi James, The best/right way to power leds is with stable CURRENT.....not voltage! T…"

Nick Arsov replied May 31, 2012 to LEDs (big, serious LEDs) brightness control

14 Jun 2, 2012
Reply by Dane

"Hi Seppo, I think 433 would be the better choise. Best regards Nick"

Nick Arsov replied May 29, 2012 to RFD900, RFD900+ - New long range radio modem

759 Jan 29
Reply by Michael Weber

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service