Don Cramer's Discussions (126)

Discussions Replied To (111) Replies Latest Activity

"The PDB seems more of a convenience than a requirement. It itself only uses the BEC…"

Don Cramer replied Oct 18, 2011 to powering esc's with out the distrabution board

16 Oct 26, 2011
Reply by Arnt-Inge Hansen

"The counter rotating props are required on a quad not only to counter the engine tor…"

Don Cramer replied Oct 15, 2011 to All propellers rotating same way... Can I angle all motors or just one???

3 Oct 16, 2011
Reply by arashi

"I have a few of these   http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idP…"

Don Cramer replied Oct 14, 2011 to FPV camera for arducopter

2 Oct 14, 2011
Reply by geir

"Sure.. When you power your video tx/cam on the same battery used to power the esc's/…"

Don Cramer replied Oct 14, 2011 to <12volt Camera in US?

8 Oct 14, 2011
Reply by Jose Angel

"The 12v video tx and cameras from readymaderc work fine running off a 3s lipo flight…"

Don Cramer replied Oct 13, 2011 to <12volt Camera in US?

8 Oct 14, 2011
Reply by Jose Angel

"Generally speaking normally the larger the mutlicopter the more stable it will perfo…"

Don Cramer replied Oct 11, 2011 to Quad frame size and inherent stability

4 Oct 12, 2011
Reply by Al Ros

"Thanks Jason. Just what i needed."

Don Cramer replied Oct 8, 2011 to 2.0.47 Default PID's Question

2 Oct 8, 2011
Reply by Don Cramer

"More than likely the issues will still remain. I am running 2.0.46 and have similar…"

Don Cramer replied Oct 4, 2011 to Arducopter Tricopter yaw issue

9 Oct 6, 2011
Reply by kolin

"In the latest git (i believe its 2.0.46, it may have been changed sooner) the deadba…"

Don Cramer replied Sep 30, 2011 to Tricopter Yaw Deadband

21 Oct 2, 2011
Reply by Rui Manuel Cravo Marques

"Yeah i have a similar experience as well in this regard. I basically adjust my servo…"

Don Cramer replied Sep 27, 2011 to Tricopter Yaw Deadband

21 Oct 2, 2011
Reply by Rui Manuel Cravo Marques

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service