Jimmy Prouty's Discussions (42)

Discussions Replied To (29) Replies Latest Activity

"Got it figured out.  The instructions have been outdated by the firmware for the APM…"

Jimmy Prouty replied Nov 3, 2014 to Help with Y6 Setup/APM 2.6

1 Nov 3, 2014
Reply by Jimmy Prouty

"Well, I unplugged everything and reassembled it to make sure that I had all the plug…"

Jimmy Prouty replied Jan 26, 2014 to APM Elevon Mixing Problem

3 Jan 26, 2014
Reply by Jimmy Prouty

"I did that several times via Mission Planner and no matter what combination I used o…"

Jimmy Prouty replied Jan 25, 2014 to APM Elevon Mixing Problem

3 Jan 26, 2014
Reply by Jimmy Prouty

"That did it! Added a  BEC to regulate the power (9V) and plugged it in before trying…"

Jimmy Prouty replied Jan 23, 2014 to Minimosd Update Character Set

5 Jan 23, 2014
Reply by Jimmy Prouty

"Thanks!  Will give that a try now."

Jimmy Prouty replied Jan 23, 2014 to Minimosd Update Character Set

5 Jan 23, 2014
Reply by Jimmy Prouty

"Thanks, mP1.  I have it powered as you suggested.  I didn't know that you have to ha…"

Jimmy Prouty replied Jan 23, 2014 to Minimosd Update Character Set

5 Jan 23, 2014
Reply by Jimmy Prouty

Developer

"Had an interesting problem today.  The guys were flying an F2 with an APM 2.5 runnin…"

Jimmy Prouty replied Oct 1, 2013 to APM:Plane 2.74 released

828 Sep 23, 2016
Reply by M Awais

"Is it possible to turn off the command to shoot based on distance like you did for s…"

Jimmy Prouty replied Sep 4, 2013 to DO_REPEAT_SERVO - Arduplane 2.74

3 Sep 4, 2013
Reply by srod

"Sounds great!do is there an accurate guide as to where to plug everything in and how…"

Jimmy Prouty replied Aug 16, 2013 to Canon CHDK APM Connection Schematic?

35 Sep 28, 2015
Reply by Nicolas Menoni

"If I'm correct, the point that the picture is triggered isn't considered a WP. Pleas…"

Jimmy Prouty replied Aug 15, 2013 to Canon CHDK APM Connection Schematic?

35 Sep 28, 2015
Reply by Nicolas Menoni

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service