john fletcher's Discussions (17)

Discussions Replied To (13) Replies Latest Activity

"Hi Todd, No, I don't understand why explaining this was so hard or what harm could h…"

john fletcher replied Feb 14, 2013 to 5.23 Volt output signal pwm APM2

3 Feb 18, 2013
Reply by Todd Lewis

"Hi, I'd hoped to have an offical answer, what the board tolerates is not it's specif…"

john fletcher replied May 17, 2012 to What's the spec for voltage on APM2

2 May 17, 2012
Reply by john fletcher

"Hi again, Tests on the APM2 I've got show at least that:- 1) The board complete with…"

john fletcher replied May 14, 2012 to What's the spec for voltage on APM2

2 May 17, 2012
Reply by john fletcher

"Hi Vernon, It's discussed in 'Alternative ways to power your board', but I wasn't l…"

john fletcher replied May 6, 2012 to 5.23 Volt output signal pwm APM2

5 May 6, 2012
Reply by john fletcher

"Hi There, Well, the solution goes like this :- First, installed the power is normall…"

john fletcher replied May 5, 2012 to 5.23 Volt output signal pwm APM2

5 May 6, 2012
Reply by john fletcher

"Hi Vernon, First, Thanks very much for the reply. The 5.23 Volts is about 0.15 below…"

john fletcher replied May 4, 2012 to 5.23 Volt output signal pwm APM2

5 May 6, 2012
Reply by john fletcher

"For 2.4 XBEE Pro S2B on Sparkfun adaptors only. After searching for hours and hours…"

john fletcher replied Apr 20, 2012 to Issues with XBee PRO and XStreamBee adapter board

17 Sep 9, 2013
Reply by Vitalii S.

"Well, Well!! For 2.4 XBEE Pro S2B on Sparkfun adaptors only. After searching for ho…"

john fletcher replied Apr 20, 2012 to Issues with XBee PRO and XStreamBee adapter board

17 Sep 9, 2013
Reply by Vitalii S.

"Hi, Well after lots of searching there is a way to unbrick your xbee, it's to 1 unpl…"

john fletcher replied Apr 16, 2012 to Issues with XBee PRO and XStreamBee adapter board

17 Sep 9, 2013
Reply by Vitalii S.

"Cliff, It seems that enabling the pull up resistors stops the bee from working perma…"

john fletcher replied Apr 10, 2012 to Issues with XBee PRO and XStreamBee adapter board

17 Sep 9, 2013
Reply by Vitalii S.

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service