Phil Cole's Discussions (79)

Discussions Replied To (77) Replies Latest Activity

"Can you build the target system using the Arduino IDE? That will show that you have…"

Phil Cole replied Jul 30, 2012 to Building ArduPlane SITL in Windows Vista

3 Aug 1, 2012
Reply by William Wishon

"There was an error on my part too. I forgot that APM2 doesn't have a hardware multip…"

Phil Cole replied Apr 30, 2012 to Configuraing Elevon Mixing on APM2

15 Apr 30, 2012
Reply by Phil Cole

"Manual mode passes the receiver signals straight through to the servos. The APM SW d…"

Phil Cole replied Apr 30, 2012 to Configuraing Elevon Mixing on APM2

15 Apr 30, 2012
Reply by Phil Cole

"You could try flying with the compass disabled. It should still navigate, just not i…"

Phil Cole replied Apr 28, 2012 to Testing APM - Loiter and RTL Drift South Continuously

13 Jun 18, 2012
Reply by Chad P

"Set your tx for max throws before calibrating, then reduce them to the values to wha…"

Phil Cole replied Mar 29, 2012 to Configuraing Elevon Mixing on APM2

15 Apr 30, 2012
Reply by Phil Cole

"If it's wagging imperceptibly due to control loop instability while hovering it will…"

Phil Cole replied Mar 21, 2012 to ArduCopter Traditional Heli (was: "600-size heli")

1940 Jul 21, 2017
Reply by William Darry

"No, the tails don't wag when they're hovering. It just stays where they left it in t…"

Phil Cole replied Mar 21, 2012 to ArduCopter Traditional Heli (was: "600-size heli")

1940 Jul 21, 2017
Reply by William Darry

"Conductive glue, otherwise known as solder. If it was properly soldered in the first…"

Phil Cole replied Mar 16, 2012 to ArduCopter Traditional Heli (was: "600-size heli")

1940 Jul 21, 2017
Reply by William Darry

"I just downloaded 2.28 from planner 1.1.49 into an APM2 and configured it for elevon…"

Phil Cole replied Mar 7, 2012 to Configuraing Elevon Mixing on APM2

15 Apr 30, 2012
Reply by Phil Cole

"Also, if the price was significantly cheaper you've probably ordered the wrong modul…"

Phil Cole replied Mar 6, 2012 to XBee availability?

20 Apr 25, 2012
Reply by Greg

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service