Christiaan van Vollenstee's Discussions (151)

Discussions Replied To (122) Replies Latest Activity

"Pop me an email (cvanvollenstee@cfaktor.com), I sell the Talon for $120 and the exte…"

Christiaan van Vollenstee replied Apr 28, 2016 to Mapping plane frame

49 Aug 9, 2016
Reply by Pascal P.

"The Turnigy 3s 5000mah fits very nice in the back and the Iris operates as it should…"

Christiaan van Vollenstee replied Oct 2, 2014 to Is it possible to change 3DR Iris' battery to a different battery with increased amperage for increased flight time?

26 Nov 29, 2015
Reply by Chris Frank

"If you do some research go check a bit at IBCrazy's blogs they have some good design…"

Christiaan van Vollenstee replied May 28, 2014 to 433 Mhz antennas for 3Dr radios

58 Mar 15, 2015
Reply by Gisela & Joe Noci

"Trent from my geek show did an awesome episode on range test http://www.mygeekshow.…"

Christiaan van Vollenstee replied May 28, 2014 to 433 Mhz antennas for 3Dr radios

58 Mar 15, 2015
Reply by Gisela & Joe Noci

"If you want to get range, put this http://arrowantennas.com/arrowii/440-7ii.html on…"

Christiaan van Vollenstee replied May 28, 2014 to 433 Mhz antennas for 3Dr radios

58 Mar 15, 2015
Reply by Gisela & Joe Noci

Developer

"I use a 3DR power module. This is the first time this happened."

Christiaan van Vollenstee replied May 19, 2014 to ArduCopter-3.1 released!

1535 Jul 13, 2016
Reply by John DeVere

Developer

"I had a very bad crash this weekend and this is just after I uploaded the latest fir…"

Christiaan van Vollenstee replied May 19, 2014 to ArduCopter-3.1 released!

1535 Jul 13, 2016
Reply by John DeVere

"This happens allot to me as well, its the battery."

Christiaan van Vollenstee replied May 16, 2014 to I had a crash today where my 3D6 RTF Y6 seemed to be a glide slope type landing with no control from my end

34 May 16, 2014
Reply by Christiaan van Vollenstee

"Could the ban on UAVs export in the US be because of this article http://www.suasne…"

Christiaan van Vollenstee replied May 13, 2014 to 3DRobotics temporarily stops shipments outside of US and Canada

490 Sep 2, 2014
Reply by Graham Hill

"The bixler type frame will be the best for you, what I like about the bixler is if y…"

Christiaan van Vollenstee replied Mar 20, 2014 to New 3d Robotics Plane vs 3DR Blixler plane

5 Mar 20, 2014
Reply by John McGrath

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service