Kurt Kreiger's Discussions (65)

Discussions Replied To (57) Replies Latest Activity

"Also depending on what flight mode you are in, the controller is expecting to see so…"

Kurt Kreiger replied Dec 5 to Pixhawk motors stop

2 Dec 5
Reply by Kurt Kreiger

"http://wiki.mikrokopter.de/en/CamCtrl "

Kurt Kreiger replied Dec 5 to Campaign for Sony Multiport protocol reverse engineering

8 Dec 6
Reply by Nathaniel McMahon

"@Brian What are you using for batteries and what was AUW? We have been experimenting…"

Kurt Kreiger replied Aug 23 to How to get longest flight time on octocopter that has decent payload already on it?

15 Aug 28
Reply by RM Aviation

"Still running 3.2.1. We had a successful mission with the Octa but I was unable to d…"

Kurt Kreiger replied Aug 30, 2016 to X8 Octo Quad with E1200 DJI system

5 Aug 30, 2016
Reply by Kurt Kreiger

"Well that didn't change anything. It does still supply 5.3 to board, just no amp det…"

Kurt Kreiger replied Aug 22, 2016 to X8 Octo Quad with E1200 DJI system

5 Aug 30, 2016
Reply by Kurt Kreiger

"I am going to solder a jumper on the power module today so power goes straight throu…"

Kurt Kreiger replied Aug 21, 2016 to X8 Octo Quad with E1200 DJI system

5 Aug 30, 2016
Reply by Kurt Kreiger

"Here is the amp and throttle position graph. Doesn't look like the amps dropped unti…"

Kurt Kreiger replied Aug 20, 2016 to X8 Octo Quad with E1200 DJI system

5 Aug 30, 2016
Reply by Kurt Kreiger

"Found this: http://discuss.ardupilot.org/t/external-leds-arduplane/4639 Anybody wil…"

Kurt Kreiger replied Jul 21, 2016 to ArduPlane external LEDs and beeper

10 Jul 21, 2016
Reply by Kurt Kreiger

"Anyone have a fix for this? Mine is buried as well"

Kurt Kreiger replied Jul 21, 2016 to ArduPlane external LEDs and beeper

10 Jul 21, 2016
Reply by Kurt Kreiger

"First thing I should have checked was the wiring. The TX/RX was swapped. Good to go…"

Kurt Kreiger replied Feb 16, 2016 to Pixhawk and neo-7M "NO GPS"

4 Feb 16, 2016
Reply by Kurt Kreiger

RSS

© 2017   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service