Jerry Chapman's Discussions (32)

Discussions Replied To (23) Replies Latest Activity

"Scott, I wondered the same thing. I couldn't tell from your picture if the quad had…"

Jerry Chapman replied Aug 9, 2010 to Getting my ArduCopter in the Air?

47 Jun 14, 2016
Reply by Ibz

"Scott, Sounds like your there. Just had to tell us the right thing. I had asked if i…"

Jerry Chapman replied Aug 8, 2010 to Getting my ArduCopter in the Air?

47 Jun 14, 2016
Reply by Ibz

"Code is fine. Maybe its our preception of whats CW or CCW. I'm not sure. Your motor…"

Jerry Chapman replied Aug 8, 2010 to Getting my ArduCopter in the Air?

47 Jun 14, 2016
Reply by Ibz

"Scott, Now were getting some where. This is the same problem I had. Do just like Joh…"

Jerry Chapman replied Aug 8, 2010 to Getting my ArduCopter in the Air?

47 Jun 14, 2016
Reply by Ibz

"Scott, You thought maybe you knew what the problem. What did you find?"

Jerry Chapman replied Aug 8, 2010 to Getting my ArduCopter in the Air?

47 Jun 14, 2016
Reply by Ibz

"Scott, When using the configurator you check more than the radio sticks, you also ch…"

Jerry Chapman replied Aug 7, 2010 to Getting my ArduCopter in the Air?

47 Jun 14, 2016
Reply by Ibz

"Scott, The two things that helped me the most to get mine flying was: 1st: Using th…"

Jerry Chapman replied Aug 7, 2010 to Getting my ArduCopter in the Air?

47 Jun 14, 2016
Reply by Ibz

"Scott, What are your tuning parameters for the yaw in acro mode? Are you still runni…"

Jerry Chapman replied Aug 7, 2010 to Getting my ArduCopter in the Air?

47 Jun 14, 2016
Reply by Ibz

"You need to remove your props and connect your quad up to the configurator. First,…"

Jerry Chapman replied Aug 6, 2010 to Getting my ArduCopter in the Air?

47 Jun 14, 2016
Reply by Ibz

"Tell us more about your quad. + or X? What direction are each of the motors spinning…"

Jerry Chapman replied Aug 6, 2010 to Getting my ArduCopter in the Air?

47 Jun 14, 2016
Reply by Ibz

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service