Gord Likar's Discussions (24)

Discussions Replied To (18) Replies Latest Activity

"Several suppliers, rctimer for one, sell shafts with c clip slots at the end."

Gord Likar replied Dec 22, 2011 to MyDiyTri Part 2... the pitfalls of DIY from scratch

3 Dec 23, 2011
Reply by Don Brooks

"This fellow does a great overview of FPV, best camera, frequency and antenna, etc. h…"

Gord Likar replied Oct 7, 2011 to telemetry 900MHz or 2.4GHz

16 Nov 6, 2011
Reply by UAVOZ

"I bought a few MT2814 motors to test. http://www.rctigermotor.com/show.php?contentid…"

Gord Likar replied Jun 24, 2011 to Replacement motors

13 Jul 15, 2011
Reply by Vincent Mees

"Don't know anything about jDrones motors.   I am not all negative on RC-Timer motors…"

Gord Likar replied Jun 13, 2011 to Octocopter, parts list

10 Jun 13, 2011
Reply by Gord Likar

"For  3s , 11.6V   and   12x3.8  Prop                            Amps            Gram…"

Gord Likar replied Jun 13, 2011 to Octocopter, parts list

10 Jun 13, 2011
Reply by Gord Likar

"I have those motors.  The highest current draw recorded on the test bench was ~20 am…"

Gord Likar replied Jun 10, 2011 to Octocopter, parts list

10 Jun 13, 2011
Reply by Gord Likar

"Think of a prop as a wing.  Lift is up front on the top where its cambered, and with…"

Gord Likar replied May 27, 2011 to counter rotating propellers

9 May 27, 2011
Reply by Grant Maxwell

"Unsymmetrical fixed pitch props are either a tractor or pusher and can only rotate o…"

Gord Likar replied May 27, 2011 to counter rotating propellers

9 May 27, 2011
Reply by Grant Maxwell

"Hi Jack,  in "arduimu.pde"  look for:    "/* Support for optional barometer (1 enabl…"

Gord Likar replied Apr 28, 2011 to Absolute Pressure and Temperature Sensor - BMP085

6 Apr 28, 2011
Reply by Gord Likar

"How far did they overlap?"

Gord Likar replied Apr 24, 2011 to Experimental Data - Watts, RPM, Lift

1 Apr 24, 2011
Reply by Gord Likar

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service