Ryan T's Discussions (11)

Discussions Replied To (11) Replies Latest Activity

"are you using this as a governor for apm out of curiosity?"

Ryan T replied Aug 8, 2013 to Is Anybody Using APM1 on TradHeli Anymore?

12 Aug 8, 2013
Reply by Rob_Lefebvre

"http://www.rotorquest.com/product_info.php?cPath=38_233_924_1352&products_id=100…"

Ryan T replied Aug 7, 2013 to Is Anybody Using APM1 on TradHeli Anymore?

12 Aug 8, 2013
Reply by Rob_Lefebvre

"generally about 900rpm main rotor (played with between 800 to 1000) , I'm currently…"

Ryan T replied Aug 7, 2013 to Is Anybody Using APM1 on TradHeli Anymore?

12 Aug 8, 2013
Reply by Rob_Lefebvre

"that's an interesting idea I've been debating the same with my 700e, i'm already run…"

Ryan T replied Aug 1, 2013 to Is Anybody Using APM1 on TradHeli Anymore?

12 Aug 8, 2013
Reply by Rob_Lefebvre

"take a look at the comments over here it sounds like your having the same problem. h…"

Ryan T replied Jul 2, 2013 to NOOB 600trex build, swashplate binding!

3 Jul 9, 2013
Reply by Rod

"its not a bad idea to varnish or epoxy the back of the pcb after your done to ensure…"

Ryan T replied Jun 21, 2013 to N00B Questions

25 Jun 24, 2013
Reply by Rob_Lefebvre

"you could always open your controller calibration screen in apm and see what moves w…"

Ryan T replied Jun 16, 2013 to Arducopter 2.9 for TradHeli Discussion

943 Sep 9, 2013
Reply by Rob_Lefebvre

"sounds like your YAW PID's for rate/stab need to be tuned Manfred and Robert both ha…"

Ryan T replied Jun 16, 2013 to Arducopter 2.9 for TradHeli Discussion

943 Sep 9, 2013
Reply by Rob_Lefebvre

"well it depends where the channel is plugged in on rx end and what you have it mappe…"

Ryan T replied Jun 16, 2013 to Arducopter 2.9 for TradHeli Discussion

943 Sep 9, 2013
Reply by Rob_Lefebvre

"when I've been tuning my apm I've had to change collective settings in the advanced…"

Ryan T replied May 20, 2013 to Swash Travel Bottom Value

3 May 21, 2013
Reply by Rob_Lefebvre

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service