Anthony's Discussions (36)

Discussions Replied To (23) Replies Latest Activity

"Also, it's unclear from http://www.maxbotix.com/Ultrasonic_Sensors/MB1242.htm whethe…"

Anthony replied Oct 24, 2016 to Pixhawk PX4 with Maxbotic I2CXL-MaxSonar-EZ2

5 Oct 24, 2016
Reply by Crady von Pawlak

"Actually since ArduPilot uses px4 firmware it could be a problem for ArduPlane/ArduC…"

Anthony replied Oct 24, 2016 to Pixhawk PX4 with Maxbotic I2CXL-MaxSonar-EZ2

5 Oct 24, 2016
Reply by Crady von Pawlak

"@ Thomas Stone : It seems like a rangefinder is required for precision landing in th…"

Anthony replied Oct 22, 2016 to image processing for precision landing

33 Sep 19, 2017
Reply by Dave Jacob

"What max current should I expect from a motor which spec says X Amps then?  Is there…"

Anthony replied Sep 27, 2016 to On getting the most out of a motor

4 Sep 28, 2016
Reply by Andre K.

"@James, @Randy, any idea?  Thanks"

Anthony replied Sep 10, 2016 to fetch servo PWM values with MAVLink

2 Sep 10, 2016
Reply by Anthony

"Anybody? :-/"

Anthony replied Sep 8, 2016 to fetch servo PWM values with MAVLink

2 Sep 10, 2016
Reply by Anthony

"Which one is this? Also I'm reading here that the Solo uses a "Pixhawk 2" ?  I'm co…"

Anthony replied Sep 3, 2016 to onboard software flight stack comparison between PX4 and ArduPilot

7 Sep 4, 2016
Reply by James

"Oops good catch, there was a typo in my diagram, I meant to connect the servo rail +…"

Anthony replied Aug 31, 2016 to Powering Raspberry Pi via micro USB and connect it to Pixhawk

6 Aug 31, 2016
Reply by Anthony

"@Patrick Poirier - yes I tried, it doesn't help."

Anthony replied Aug 31, 2016 to image processing for precision landing

33 Sep 19, 2017
Reply by Dave Jacob

"OK so to make things simple I'll go with the UBEC powering the servo rail, and the P…"

Anthony replied Aug 31, 2016 to Powering Raspberry Pi via micro USB and connect it to Pixhawk

6 Aug 31, 2016
Reply by Anthony

RSS

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service