Simon Kirby's Discussions (13)

Discussions Replied To (13) Replies Latest Activity

"The only benefit would be that the oscillator speed would drift less with temperatur…"

Simon Kirby replied Jan 24, 2016 to Tear down of Hobbypower 30A Simonk ESC

3 Jan 30, 2016
Reply by Jeffrey Foster

"Note possibly related issue: https://github.com/sim-/tgy/issues/50#issuecomment-6830…"

Simon Kirby replied May 13, 2015 to ESC Recommendations. No EMAX, and no SimonK, as neither work with Pixhawk

49 May 14, 2015
Reply by Phil Gamito

"Well, it sounded like from your previous post that the firmware update had resolved…"

Simon Kirby replied May 12, 2015 to ESC Recommendations. No EMAX, and no SimonK, as neither work with Pixhawk

49 May 14, 2015
Reply by Phil Gamito

"Paul, you sound defeated. :) Does it stop accelerating part-way up the throttle, or…"

Simon Kirby replied May 12, 2015 to ESC Recommendations. No EMAX, and no SimonK, as neither work with Pixhawk

49 May 14, 2015
Reply by Phil Gamito

"Hi Bill, I can't control the EMAX firmware, since I have nothing to do with them. Th…"

Simon Kirby replied May 12, 2015 to ESC Recommendations. No EMAX, and no SimonK, as neither work with Pixhawk

49 May 14, 2015
Reply by Phil Gamito

"Well, it would be nice to get working what isn't, if only for the purpose of avoidin…"

Simon Kirby replied May 11, 2015 to ESC Recommendations. No EMAX, and no SimonK, as neither work with Pixhawk

49 May 14, 2015
Reply by Phil Gamito

"Hi Phil, The ESC always uses the input immediately following the low-going edge, unl…"

Simon Kirby replied May 10, 2015 to ESC Recommendations. No EMAX, and no SimonK, as neither work with Pixhawk

49 May 14, 2015
Reply by Phil Gamito

"Hi Phil, Sorry to hear about your troubles. I'm curious what the problem might be. W…"

Simon Kirby replied May 7, 2015 to ESC Recommendations. No EMAX, and no SimonK, as neither work with Pixhawk

49 May 14, 2015
Reply by Phil Gamito

"Maybe try a servo tester to each ESC to make sure the outputs are matching? If not,…"

Simon Kirby replied Dec 26, 2014 to Throttle issue on simonk 20A HK BlueSeries ESC

2 Dec 30, 2014
Reply by Max Miller

"Hello! It looks a lot to me like an RCTimer ESC, which is an ATmega8-based Hobbywing…"

Simon Kirby replied Sep 23, 2014 to SimonK firmware for the old 3DRobotics ESC.

3 Feb 9, 2015
Reply by Bruce Hansche

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service