Limebear (Rob)'s Discussions (168)

Discussions Replied To (143) Replies Latest Activity

"oUCH!, that looks like a very dangerous way to hold it. Too many stories on here of…"

Limebear (Rob) replied Jun 27, 2011 to throttle and yaw action

10 Jun 27, 2011
Reply by Rob. S

"Just looking at the diffs, a piece of code that was commented out in R2670 with the…"

Limebear (Rob) replied Jun 27, 2011 to Arducopter 2.0.26

14 Jun 27, 2011
Reply by Limebear (Rob)

"The yellow safety advice boxes that are scattered around the manual use beautifully…"

Limebear (Rob) replied Jun 27, 2011 to LED A off?

11 Jun 27, 2011
Reply by Joe

"There is also the tantalising suggestion that one of the stereo audio channels can b…"

Limebear (Rob) replied Jun 26, 2011 to 5.8 GHz video kit

2 Jun 26, 2011
Reply by Limebear (Rob)

"sorry, forgot to add the links to the items: http://www.firstpersonview.co.uk/transm…"

Limebear (Rob) replied Jun 26, 2011 to 5.8 GHz video kit

2 Jun 26, 2011
Reply by Limebear (Rob)

"Put the video recorder in a fixed place, then fly the quad in front of it. Need not…"

Limebear (Rob) replied Jun 26, 2011 to throttle and yaw action

10 Jun 27, 2011
Reply by Rob. S

"Yes, its the four wire signal cable to the ESCs that's soldered to the Power Distrib…"

Limebear (Rob) replied Jun 25, 2011 to LED A off?

11 Jun 27, 2011
Reply by Joe

"Dani, I'm puzzled by the logic of the motor mixing. A motor that's closer to the cen…"

Limebear (Rob) replied Jun 25, 2011 to Arducopter Support for uneven Hexa TY6 H6

12 Apr 8, 2013
Reply by Forrest Frantz

"Gary; Martin; If they are using 5.8 legally in the UK they would be limited to 25 mW…"

Limebear (Rob) replied Jun 25, 2011 to Xbee telemetry kit for use in UK

29 Aug 2, 2011
Reply by Martint BuildYourOwnDrone.co.uk

"Hi John, you're ok with the 2.4 GHz radio because it's spread spectrum. The problem…"

Limebear (Rob) replied Jun 24, 2011 to Xbee telemetry kit for use in UK

29 Aug 2, 2011
Reply by Martint BuildYourOwnDrone.co.uk

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service