Joe's Discussions (110)

Discussions Replied To (98) Replies Latest Activity

"Puzzled? Don't know what I did to have Radio 5 active. Move what suppose to be the t…"

Joe replied Nov 2, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Going to go check CLI and see if changing certain "values" helps?"

Joe replied Nov 2, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Found another issue. You are supposed to calibrate the ESC all at once, (or) singula…"

Joe replied Nov 2, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Hi Ultrafuge, Yes I watched the video. I don't know if those settings for a flying w…"

Joe replied Nov 2, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Hi Ultrafuge, LOST IN TRANSLATION. That so called manual that came with this Tx is g…"

Joe replied Nov 1, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Nothing happen with that servo? Just twitched when it was first plugged in?"

Joe replied Nov 1, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Hi Ultrafuge, (Checking it one more time.) I read that your supposed to program in A…"

Joe replied Nov 1, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Hi Ultrafuge, Okay – Pins 1, 2,3,4,5 that are coming out of the receiver module on t…"

Joe replied Nov 1, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"I forgot to add that the servo plugged into "Output pin 7" doesn't do anything eithe…"

Joe replied Oct 31, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Hi Ultrafuge, Even though the Green bars respond to the stick movements in Mission P…"

Joe replied Oct 31, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service