Joe's Discussions (110)

Discussions Replied To (98) Replies Latest Activity

"Hi Brandon, I went into the advanced parameter tab and changed it from Channel 4, (Y…"

Joe replied Oct 29, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Hi Chris, I just "reset" the APM using the DOS commands in "Terminal" in Mission Pla…"

Joe replied Oct 29, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Hi Chris, APM photo wiring - Output side are Pins - 1,2,4 ESC's, Pin 7 is the tail…"

Joe replied Oct 29, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"That's okay. I tried tilting it in different directions and the motors remained cons…"

Joe replied Oct 28, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Nice video. Yes, pusher prop, CW right front, regular prop, CCW left front, CCW on t…"

Joe replied Oct 28, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"The wiring is correct so it has come down to 1 of 3 things: 1) Settings on the trans…"

Joe replied Oct 28, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"It's plugged into output 7. And its in stabilized mode. But no response? Just thrott…"

Joe replied Oct 27, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"I don't know? (I'm beginning to think that the APM is defective?) Reloaded the firmw…"

Joe replied Oct 27, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Will do... Thanks!"

Joe replied Oct 26, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Question? What size servo? And does that "tail servo" need it's own ESC? Or does it…"

Joe replied Oct 26, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service