Joe's Discussions (110)

Discussions Replied To (98) Replies Latest Activity

"It's learning curve. To build something and it works the first time, is fine. But if…"

Joe replied Oct 26, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Yes, this is the setup I used. Prop 1 CW, Props 2,3 CCW."

Joe replied Oct 26, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"I just learned something new then. (Going to have to order servos.) Thanks for input!"

Joe replied Oct 26, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Hi Ultrafuge, I'll do that later on today. I'm starting to think it is something in…"

Joe replied Oct 26, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Hi Artem, Using a Flysky, 9 channel transmitter. Later on today I'll go through eve…"

Joe replied Oct 26, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Hi Graham, There are no servos. It flies by varying the power to the props."

Joe replied Oct 26, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"I taped twelve washers on that right boom arm to hold it down, it didn't work. I als…"

Joe replied Oct 25, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"APM"

Joe replied Oct 25, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"ESC's plugged into "OUTPUTS" 1,2,4. Receiver plugged into "INPUT" pins 1,2,3,4,5. He…"

Joe replied Oct 25, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Hi Chris, I got another battery, and took this short video of what the drone is doin…"

Joe replied Oct 25, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service