Joe's Discussions (110)

Discussions Replied To (98) Replies Latest Activity

"No good. Although by moving the trim on the right side I noticed a response from the…"

Joe replied Oct 24, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Hi Chris, I just recalibrated the radio. Move the right stick, up, down, left, right…"

Joe replied Oct 24, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"New day! Here's the settings of the APM from Mission Planner. I hope that changing t…"

Joe replied Oct 24, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Hi Chris, Yes I tried that. (Moved the stick to the left, or right, no change.) The…"

Joe replied Oct 23, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"The throttle does not respond to any commands except, throttle increase or decrease.…"

Joe replied Oct 23, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"The setup... connecting receiver Channels 1,2,3, to the APM's Input pins 1,2,3. Then…"

Joe replied Oct 23, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Artem, No luck with the motor assignment. CW Motor 1, (pusher prop) CCW motors 2,3,…"

Joe replied Oct 23, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Rebuilt the Tricopter, but still have a problem with it? When power is applied to th…"

Joe replied Oct 23, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"Thanks will do. Going to dismantle and reassemble it, just to make sure everything i…"

Joe replied Oct 21, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

"I changed the RC7 REV to -1. It did stop the Tricopter from spinning like a top on t…"

Joe replied Oct 21, 2014 to Tricopter spin.

97 Nov 2, 2014
Reply by Ultrafuge

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service