MarkM's Discussions (102)

Discussions Replied To (89) Replies Latest Activity

Developer

"Can you give me a link to a lipo manufacturer that confirms that? http://www.overla…"

MarkM replied Aug 28, 2015 to Copter-3.3 beta testing

5648 Jun 20, 2016
Reply by Cala

Developer

"I've used several types of lipo and NONE of them recommend leaving a mah reserve, ie…"

MarkM replied Aug 28, 2015 to Copter-3.3 beta testing

5648 Jun 20, 2016
Reply by Cala

Developer

"But the whole purpose of super simple mode is to change the controls so they are ori…"

MarkM replied Aug 23, 2015 to Copter-3.3 beta testing

5648 Jun 20, 2016
Reply by Cala

"I too use an l9r on a pixhawk  running ac 3.2.1and have no problem with the failsafe…"

MarkM replied Jul 31, 2015 to WARNING: Receiver failsafe not working in Copter 3.2.1

26 Nov 1, 2015
Reply by Eric B.

Developer

"I was under the impression you couldn't arm in auto mode anyway, can't in 3.2.1 as i…"

MarkM replied Jul 31, 2015 to Copter-3.3 beta testing

5648 Jun 20, 2016
Reply by Cala

Developer

"Motor 4 went to max throttle while motor 3 went to minimum, possibly an esc/motor fa…"

MarkM replied Jun 29, 2015 to ArduCopter-3.2.1 Beta Testing

586 May 5, 2016
Reply by Vinh K

Developer

"I have this issue with 3.2.1 in PosHold. I find having the MOT_SPIN_ARMED set to 130…"

MarkM replied Jun 11, 2015 to Copter-3.3 beta testing

5648 Jun 20, 2016
Reply by Cala

"Mine will hover between 4-8mph on the ground and that's whether I use the cover and…"

MarkM replied May 23, 2015 to APM 2.6 - AP3.2.3 - Spiral of death in FBWA

19 Jan 17, 2017
Reply by G

"Have a read of http://plane.ardupilot.com/wiki/common-optional-hardware/airspeed-3/…"

MarkM replied May 23, 2015 to APM 2.6 - AP3.2.3 - Spiral of death in FBWA

19 Jan 17, 2017
Reply by G

"I also use the analogue one but I never fly with a groundstation, so instead of doin…"

MarkM replied May 22, 2015 to APM 2.6 - AP3.2.3 - Spiral of death in FBWA

19 Jan 17, 2017
Reply by G

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service