Paul Feely's Discussions (145)

Discussions Replied To (127) Replies Latest Activity

"Hi, Don't really know what you're trying to do but APM uses MAVLINK have a look here…"

Paul Feely replied Mar 1, 2014 to APM communication protocol

2 Mar 1, 2014
Reply by ALX

"Software is here, the ASM is based on the mega however I'm sure you'd be able to get…"

Paul Feely replied Jan 17, 2014 to XBee & telemetry question

6 Jan 17, 2014
Reply by Paul Feely

"If it wasn't clear, you can use the 3dr radios with the old ardustation but it won't…"

Paul Feely replied Jan 17, 2014 to XBee & telemetry question

6 Jan 17, 2014
Reply by Paul Feely

"Hello, the 3DR radios are an open source radio they do the same thing as the xbee's…"

Paul Feely replied Jan 17, 2014 to XBee & telemetry question

6 Jan 17, 2014
Reply by Paul Feely

"Hi Frenchguy It's not actually xbee but the 3DR radios operate in a similar way. You…"

Paul Feely replied Jan 17, 2014 to XBee & telemetry question

6 Jan 17, 2014
Reply by Paul Feely

"Bill The APM 2.5 has an onboard magnetometer (i.e. on the main APM board) so no easy…"

Paul Feely replied Dec 29, 2013 to Placement of APM 2.5+ Question (Plane)

4 Dec 30, 2013
Reply by Bill

"Hi Bill Is it an APM 2.6? If it is then the external GPS also has the Magnetometer i…"

Paul Feely replied Dec 29, 2013 to Placement of APM 2.5+ Question (Plane)

4 Dec 30, 2013
Reply by Bill

"You could also try Build Your Own Drone who are UK based official re-sellers with gr…"

Paul Feely replied Dec 24, 2013 to Apm 2.6 from unmanned.co.uk? Real 3dr?

8 Dec 30, 2013
Reply by Thomas

"Do you mean http://www.unmannedtechshop.co.uk - if you do I believe they are officia…"

Paul Feely replied Dec 23, 2013 to Apm 2.6 from unmanned.co.uk? Real 3dr?

8 Dec 30, 2013
Reply by Thomas

"Kevin There was a good post on this but it seems to have disappeared. You might ha…"

Paul Feely replied Nov 1, 2013 to Spektrum Dx6i Mix switch and Arducopter

3 May 25, 2015
Reply by mark whitton

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service