Paul Feely's Discussions (145)

Discussions Replied To (127) Replies Latest Activity

"Guys, Similar discussion over here http://diydrones.com/forum/topics/getting-my-hea…"

Paul Feely replied Oct 21, 2013 to Robotics newbie : 3DR Pixhawk Vs APM 2.6

2 Oct 21, 2013
Reply by Paul Feely

Developer

"Hi Aezerty09 I don't think it is a problem with the firmware so I would go back to…"

Paul Feely replied Aug 31, 2013 to APM:Plane 2.74 released

828 Sep 23, 2016
Reply by M Awais

Developer

"Azerty09 Have you checked out the manual pages on setting up the elevon mixing - it…"

Paul Feely replied Aug 29, 2013 to APM:Plane 2.74 released

828 Sep 23, 2016
Reply by M Awais

"Hi Brett, You can create feature request for mission planner here https://github.co…"

Paul Feely replied Aug 5, 2013 to too many questions

5 Aug 8, 2013
Reply by Buzzliteyear

"Sorry about that try this Cheers, Paul"

Paul Feely replied Aug 1, 2013 to Redundant Systems

27 Jul 19, 2014
Reply by Robert Hoermann

"@Chris The old APM hardware (APM 1.4 with the oilpan) had a hardware fail safe drive…"

Paul Feely replied Aug 1, 2013 to Redundant Systems

27 Jul 19, 2014
Reply by Robert Hoermann

"I don't have a 9X so sorry can't help with programming it but something basic must b…"

Paul Feely replied May 12, 2013 to Can't get Turnigy 9X working

16 Aug 8, 2014
Reply by Ian Seiferling

"When you plug the servos in first time they will centre to their 'neutral' position,…"

Paul Feely replied May 12, 2013 to Can't get Turnigy 9X working

16 Aug 8, 2014
Reply by Ian Seiferling

"S=signal, the PWM signal that controls the servo or ESC It can go on any unused pin…"

Paul Feely replied May 12, 2013 to Connecting APM components correctly

4 May 12, 2013
Reply by Primož Kralj

"Hi Ben, I'd recommend trying to relocate the xbee to get some distance between it an…"

Paul Feely replied Mar 23, 2013 to AR8000 interference issues with Xbee 2.4GHz

3 Mar 23, 2013
Reply by Dan Banks

RSS

Groups

Season Two of the Trust Time Trial (T3) Contest 
A list of all T3 contests is here. The current round, the Vertical Horizontal one, is here

© 2020   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service