iyad's Discussions (27)

Discussions Replied To (14) Replies Latest Activity

"am using : 4 motors : Turnigy Aerodrive D2830/11 1000kv 4 ESCs : turnigy plush 30A b…"

iyad replied Jan 28, 2015 to strongest motors with esc 30A

3 Jan 28, 2015
Reply by OG

"thank you a lot for your help and the great information . it drove me crazy to check…"

iyad replied Jan 18, 2015 to Motor shaft length stability problem

7 Jan 18, 2015
Reply by Stuart Brookes

"yes  the right side of the props of motors 1 and  3 is slightly higher than the left…"

iyad replied Jan 18, 2015 to Motor shaft length stability problem

7 Jan 18, 2015
Reply by Stuart Brookes

"yes.. Thank you ! motors 3 and 4 have higher values than motors 1 and 2  in the grap…"

iyad replied Jan 18, 2015 to Motor shaft length stability problem

7 Jan 18, 2015
Reply by Stuart Brookes

"ok i have uploaded AC v 3.1.5 to my APM and i accessed the terminal and disabled all…"

iyad replied Jan 12, 2015 to gibberish data in terminal

12 Jan 12, 2015
Reply by iyad

"sorry , i meant an older version of the firmware not mission planner. anything befor…"

iyad replied Jan 12, 2015 to gibberish data in terminal

12 Jan 12, 2015
Reply by iyad

"Thank you for the reply Bill, but i dont know how to make use of the links you poste…"

iyad replied Jan 12, 2015 to gibberish data in terminal

12 Jan 12, 2015
Reply by iyad

"when i select a log file to create a matlab file , what isthe extention of the file…"

iyad replied Jan 4, 2015 to gibberish data in terminal

12 Jan 12, 2015
Reply by iyad

"thanks a lot mate :)"

iyad replied Jan 4, 2015 to gibberish data in terminal

12 Jan 12, 2015
Reply by iyad

"yes but it has Default+MOTORS and Default+IMU , and i want both MOTORS+ IMU  how can…"

iyad replied Jan 4, 2015 to gibberish data in terminal

12 Jan 12, 2015
Reply by iyad

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service