Ryan's Discussions (119)

Discussions Replied To (100) Replies Latest Activity

"And canard or tandem wing configuration take more runway to take off - probably only…"

Ryan replied Aug 18, 2010 to WHICH WING - REAR DELTA with FRONT CANARD?

3 Oct 25, 2010
Reply by Vladimir Popov

"You're probably right...I'll check. R"

Ryan replied Aug 14, 2010 to FUTABA S-BUS - any realworld Advantage/Disadvantage?

3 Aug 14, 2010
Reply by Ryan

"Yes on all your thoughts but to me the disadvantage is that I'd have to buy servos t…"

Ryan replied Aug 14, 2010 to FUTABA S-BUS - any realworld Advantage/Disadvantage?

3 Aug 14, 2010
Reply by Ryan

"You can also just go with one layer of 45/45 carbon, and one layer of 90/90 glass to…"

Ryan replied Aug 9, 2010 to How thick should my carbon fibre be?

7 Aug 11, 2010
Reply by Ritchie

"That's a pretty short wing so I'd go with 2 layers on each side of the wing (top/bot…"

Ryan replied Aug 9, 2010 to How thick should my carbon fibre be?

7 Aug 11, 2010
Reply by Ritchie

"Correction, it's a Shadow 600."

Ryan replied Jul 27, 2010 to NEW 3.9M COMPOSITE UAV AIRPLANE

13 Nov 23, 2012
Reply by Tim

"Hmm...not sure about that! Isn't that a photo of the Shadow 400 UAV?! Is this a sur…"

Ryan replied Jul 25, 2010 to NEW 3.9M COMPOSITE UAV AIRPLANE

13 Nov 23, 2012
Reply by Tim

"You don't have to angle the verticle stabilizer in but if you want to then 10 degree…"

Ryan replied Jul 21, 2010 to to incline or slope 10 degree for Vertical stablizer

2 Jul 21, 2010
Reply by hawk

"Of course if you expect to fly the UAV fully manual during all this relaying busines…"

Ryan replied Jul 2, 2010 to Out of line-of-sight communication

13 Jul 2, 2010
Reply by David

T3

"Yep, I drilled a nice 50cc aerobatic bird in last month flying near high power lines…"

Ryan replied Jul 1, 2010 to Interference From High Voltage Transmission Lines

10 Jul 2, 2010
Reply by Morli

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service