Rob's Discussions (34)

Discussions Replied To (32) Replies Latest Activity

"Have you tried setting MPU6K_FILTER = 20 as described earlier in this thread?  I thi…"

Rob replied Apr 24, 2015 to AC3.2.1 APM 2.5 Throttle pulsates in Loiter

242 Dec 8, 2017
Reply by Butch Lucas

"From my not particularly rigorous testing, I'd be tempted to agree that it's an issu…"

Rob replied Apr 21, 2015 to AC3.2.1 APM 2.5 Throttle pulsates in Loiter

242 Dec 8, 2017
Reply by Butch Lucas

"I was having similar problems with throttle pulse in alt hold and lotier on my custo…"

Rob replied Apr 10, 2015 to AC3.2.1 APM 2.5 Throttle pulsates in Loiter

242 Dec 8, 2017
Reply by Butch Lucas

"Posted in 2013! So quite an old thread. Are you following the instructions here? htt…"

Rob replied Oct 8, 2014 to Failsafe Implementation w/ Turnigy 9X

3 Oct 8, 2014
Reply by Springfield Harrison

"I think you might struggle with getting small enough custom electronics, though the…"

Rob replied Oct 3, 2014 to Are there any kits for micro-multirotor drones (less than 12.5 cm across)?

3 Oct 6, 2014
Reply by Ted Byers

"I use mine in plane mode (I think it tells you to do this somewhere in the manual).…"

Rob replied Aug 22, 2014 to Turnigy 9x Channel 5 Problem

11 Aug 22, 2014
Reply by Jake Brown

"It sounds to me like you have some sort of mix setup on the transmitter.  You'll eit…"

Rob replied Aug 21, 2014 to Turnigy 9x Channel 5 Problem

11 Aug 22, 2014
Reply by Jake Brown

"I'm not sure how we can push it forwards.  When I created the pull request I also po…"

Rob replied Aug 19, 2014 to Super Simple Gimbal

42 Feb 12, 2017
Reply by Marvin lange

"An easy way to do this would be to get an Android phone with GPS and run the Andropi…"

Rob replied Feb 28, 2014 to Ardupilot Follow Me GPS Beacon/Box

1 Feb 28, 2014
Reply by Rob

"It'll be the length of the pulse in microseconds.  See http://en.wikipedia.org/wiki/…"

Rob replied Feb 12, 2014 to PPM to PWM conversion

1 Feb 12, 2014
Reply by Rob

RSS

© 2020   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service