Ken's Discussions (417)

Discussions Replied To (413) Replies Latest Activity

"That code won't print anything in the monitor...because it never prints to the monit…"

Ken replied May 11, 2012 to Connecting a MEGA to a MT3329 :)

7 May 11, 2012
Reply by Ken

"John is correct, and the unit will reset to its defaults when power is removed. The…"

Ken replied May 11, 2012 to Nav Speed Threshold for the MT3329 GPS unit

3 May 11, 2012
Reply by Ken

"Yes, that is what he (correctly) means. "

Ken replied May 11, 2012 to NMEA protocol

5 May 11, 2012
Reply by Ken

"Yes, they connect fine to an Arduino. I've used them with Diecimila, Uno, BareBones,…"

Ken replied May 11, 2012 to MiniGPS

7 May 11, 2012
Reply by Ken

"Yes, it works just fine. In fact, MiniGPS even works under WINE on Mac OS. Have to c…"

Ken replied May 11, 2012 to MiniGPS

7 May 11, 2012
Reply by Ken

Moderator

"RTC, almanac, and ephemeris all seem to be lost in under a second without power but…"

Ken replied May 11, 2012 to 3D fix 3 satelites

10 Jun 23, 2012
Reply by Michael Pursifull

Moderator

"Very true. The (DIYD) MTK3329 may have many channels, may output data at a high rate…"

Ken replied May 11, 2012 to 3D fix 3 satelites

10 Jun 23, 2012
Reply by Michael Pursifull

"Silicone gives of acetic acid when it cures and should not be used near electronic c…"

Ken replied May 1, 2012 to Hardware weekness on APM 2. Can one reinforce GPS connection on APM 2 oilpan?

27 May 2, 2012
Reply by Mike Mac

"You may connect 2 ESCs to one RC channel using a Y-cable. . Do NOT connect 2 motors…"

Ken replied Apr 30, 2012 to Motores brushless

2 Apr 30, 2012
Reply by James Y.

"Putting it upside down inside the fin would have been harder? "

Ken replied Apr 23, 2012 to Using ArduPilot as a Barometric Antenna Toppler - B.A.T.

2 Apr 23, 2012
Reply by Jörg Rothfuchs

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service