Dave's Discussions (172)

Discussions Replied To (169) Replies Latest Activity

"Hi Pedro, Since getting it back from Maxbotix, it's never really worked.  It seems t…"

Dave replied May 5, 2014 to Maxbotix XL-EZ0 (MB1200) Sonar Sensor Stops Working At Low Temperatures

7 May 6, 2014
Reply by mP1

"The C rating specifies the maximum continuous current a battery can safely deliver. …"

Dave replied Feb 16, 2013 to Best Battery for Arducopter Quad-C frame

20 Aug 19, 2013
Reply by Shyam Balasubramanian

"You don't give any details of the battery, but it's probably a brownout from low bat…"

Dave replied Jan 21, 2013 to Hexa looses all power at half throttle during hand test

5 Jan 21, 2013
Reply by Drew Roberts

"Is your throttle PWM going so low that it's triggering failsafe?"

Dave replied Nov 18, 2012 to Short indoor flight, landed no throthle but motors didn't stop

7 Nov 21, 2012
Reply by marcelo

"On some motors, the shaft sticks out the bottom by a mm or so.  Check that it's not…"

Dave replied Nov 3, 2012 to Really......

3 Nov 3, 2012
Reply by Sakar

"Not being an expert log analyser myself, I can't help from that side.  However, from…"

Dave replied Nov 2, 2012 to Ardupilot Randomly Loses Control\Stability Resulting In Crash

1 Nov 2, 2012
Reply by Dave

"The cold issue is a known problem: http://diydrones.com/forum/topics/maxbotix-xl-ez0…"

Dave replied Oct 10, 2012 to Does this look right for Sonar?

5 Oct 10, 2012
Reply by Tobias Halldin

"The sonar is very sensistive and will see almost anything in the beam - fixed or mov…"

Dave replied Oct 10, 2012 to Calibrating Sonar

6 Oct 16, 2012
Reply by Stephen R Mann

"You could connect this to channel 8 of your receiver: http://www.hobbyking.com/hobby…"

Dave replied Aug 29, 2012 to Better Safety Functions

12 Sep 6, 2012
Reply by Allen Stevens

"The sonar is very sensitive.  Mine reacts to a wire fence from 2m above.  You need t…"

Dave replied Aug 17, 2012 to RTL: Landing problems

5 Aug 27, 2012
Reply by MaxBotix Inc


© 2020   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service