entropia666's Discussions (51)

Discussions Replied To (36) Replies Latest Activity

Developer

"Hi again, I've uploaded a video of my Yawing issues: https://www.youtube.com/watch?v=…"

entropia666 replied Oct 28, 2012 to ArduCopter 2.8 / 2.8.1 released

1358 Nov 11, 2013
Reply by Randy

"Is you quadricopter symmetrical? I mean, are the motors on a square's corners?"

entropia666 replied Oct 26, 2012 to Pitch and Roll PID settings

3 Oct 26, 2012
Reply by Paul Thunder

Developer

"Randy, thank you for your reply. Anyway I was speaking about loiter gains, not stabi…"

entropia666 replied Oct 25, 2012 to ArduCopter 2.8 / 2.8.1 released

1358 Nov 11, 2013
Reply by Randy

Developer

"Thank you to all the dev team! I tested this release this morning, I have the impres…"

entropia666 replied Oct 24, 2012 to ArduCopter 2.8 / 2.8.1 released

1358 Nov 11, 2013
Reply by Randy

"For information, I did the modification, loaded the firmware and it works, tested in…"

entropia666 replied Oct 24, 2012 to Some questions about SD card logs

2 Oct 24, 2012
Reply by entropia666

"I join the debate. I can add two scenarii (found over the internet): Potentiometer…"

entropia666 replied Oct 22, 2012 to Fly aways the failsafe and the 9x

126 Nov 9, 2012
Reply by TFS Aeronautical Robotics Club

"Hi again, I have maybe the answer to the 1st question: even if the update_gps is cal…"

entropia666 replied Oct 16, 2012 to Some questions about SD card logs

2 Oct 24, 2012
Reply by entropia666

"Thank you for the tip on the wrench, I didn't think about it! I will do the operatio…"

entropia666 replied Sep 26, 2012 to Hexacopter robustness to failures

4 Sep 26, 2012
Reply by entropia666

"Thank you for you reply Luke, actually after the first crash I did use some threadlo…"

entropia666 replied Sep 26, 2012 to Hexacopter robustness to failures

4 Sep 26, 2012
Reply by entropia666

Developer

"At first: Pitch +- 180° Then Roll +- 90° (right wing down first) Then pitch +-90° (I…"

entropia666 replied May 8, 2012 to MPU6000 scaling issue

89 May 22, 2012
Reply by Jake Stew

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service