William Bishop's Discussions (45)

Discussions Replied To (36) Replies Latest Activity

"Christof, Please check this post and tell me what you ideas and comments are appreci…"

William Bishop replied Apr 6, 2011 to QUAD Rotor Sizes and RPMs needed

29 Apr 13, 2011
Reply by Russell B. Sutton

"Do you guys think that the T-Rex 700 blades can be modified (shortened) so as to kee…"

William Bishop replied Apr 6, 2011 to ESCs & DCBM vs Pitch controlled stabilization

5 Apr 6, 2011
Reply by Christof Schmid

"Pitch only no cyclic, pinion or worm gear scissor jack type lever under the swashpla…"

William Bishop replied Apr 6, 2011 to ESCs & DCBM vs Pitch controlled stabilization

5 Apr 6, 2011
Reply by Christof Schmid

"Thanks again Duane I know this should probably move to another topic thread.....but…"

William Bishop replied Apr 5, 2011 to FAA sUAS Regulations

6 Apr 5, 2011
Reply by Sgt Ric

"Thanks Duane, I'm not worried about breaking any laws, it is all off the shelf publi…"

William Bishop replied Apr 5, 2011 to FAA sUAS Regulations

6 Apr 5, 2011
Reply by Sgt Ric

"Is the XBee Pro 900 RPSMA OK to use with 900MHz RP-SMA 3.1dBi antenna mounted on my…"

William Bishop replied Apr 3, 2011 to Need Help In Selecting Xbee

9 Apr 3, 2011
Reply by William Bishop

"Hey guys.  FAA is the last hurdle.  Think first of developing a product that is reli…"

William Bishop replied Apr 2, 2011 to New Project, looking for a partner or 2 to design and build UAV for community surveillence

21 Apr 24, 2011
Reply by Jeremy K.

"Hey guys I have been doing motor/prop/battery calculations for days now and still ca…"

William Bishop replied Apr 1, 2011 to New Project, looking for a partner or 2 to design and build UAV for community surveillence

21 Apr 24, 2011
Reply by Jeremy K.

"Christof I came up with two possibilities for the 5 lb per motor. A whoppinhg 6 - 8…"

William Bishop replied Mar 30, 2011 to QUAD Rotor Sizes and RPMs needed

29 Apr 13, 2011
Reply by Russell B. Sutton

"Christof Great help.  Does a 3 blade prop give better results in lifting a quad?"

William Bishop replied Mar 30, 2011 to Blade Tip Speed

3 Mar 30, 2011
Reply by Christof Schmid

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service