Max Turnoff's Discussions (32)

Discussions Replied To (20) Replies Latest Activity

"Hi Francois, thanks a lot! It's very helpful and instructive. But in my case I foun…"

Max Turnoff replied Oct 22, 2012 to temperature effect on gyro

4 Oct 22, 2012
Reply by Max Turnoff

"After using 2.7.3 for while I can confirm that "log erase" issue is fixed. Thanks!!!"

Max Turnoff replied Oct 3, 2012 to On-board logging problem: erase broken

8 Oct 3, 2012
Reply by Max Turnoff

"Benny, thanks for the idea! I did install latest driver and it seems to fixed proble…"

Max Turnoff replied Oct 3, 2012 to 3DR radio crashes Windows 7 when removed from USB

4 Oct 3, 2012
Reply by Max Turnoff

"Yes, seems to be the same thing. Voted for your issue and commented it."

Max Turnoff replied Oct 1, 2012 to DO_SET_SERVO - works?

4 Oct 1, 2012
Reply by Max Turnoff

"It seems nobody interested/tried using this feature. Weird, it seems to be useful fo…"

Max Turnoff replied Sep 27, 2012 to DO_SET_SERVO - works?

4 Oct 1, 2012
Reply by Max Turnoff

"In my case jitter behaviour of  MTK doesn't depend on firmware version and mode. I'v…"

Max Turnoff replied Sep 1, 2012 to APM 2.0 MTK GPS Noisy readings

8 Sep 1, 2012
Reply by Max Turnoff

"I had similar weird results on APM2 with 2.7.1: My speed set to 2.1 m/s, and PIDs…"

Max Turnoff replied Aug 25, 2012 to 2.7 Mission problems

19 Aug 25, 2012
Reply by Max Turnoff

"When the tlog gets terminated? When Mavlink connection is lost? Does it mean that if…"

Max Turnoff replied Aug 23, 2012 to How to get tlog mission and waypoints on one screen?

4 Aug 24, 2012
Reply by Ger Harris

"So finally how the Home Location is set???  Since I had bad crash related to lack of…"

Max Turnoff replied Aug 23, 2012 to Creating a switch to set "home".

86 Jul 26, 2013
Reply by Chris Khosravi

"Hi Mike, Related question: what does TRIM_THROTTLE do? It seems to be dependant on…"

Max Turnoff replied Aug 22, 2012 to APM2: How do I set cruise speed?

3 Aug 22, 2012
Reply by Max Turnoff

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service