Jakey Boy's Discussions (33)

Discussions Replied To (20) Replies Latest Activity

"Many thanks for the info Michael."

Jakey Boy replied Feb 5, 2014 to APM planner or Mission Planner - I've been away!!

2 Feb 5, 2014
Reply by Jakey Boy

"Thanks guys, i'll try that. I must admit that's the first i've heard of having to cu…"

Jakey Boy replied Sep 23, 2013 to 3DR uBlox GPS with Compass - crazy mag offset readings

7 Jun 11, 2014
Reply by dronepilot

"I appreciate your help. I'm using the skywalker 4 in 1 esc unit, and yes it has been…"

Jakey Boy replied Aug 25, 2013 to Adjusting throttle PIDs (which should I adjust?)

12 Aug 25, 2013
Reply by leonardthall

"Hi Oliver, thanks for your response. It was definitely in Stabilise mode. I understa…"

Jakey Boy replied Aug 25, 2013 to Adjusting throttle PIDs (which should I adjust?)

12 Aug 25, 2013
Reply by leonardthall

"Hi, here are the logs. Can these shine some light on what might be the problem?? "

Jakey Boy replied Aug 25, 2013 to Adjusting throttle PIDs (which should I adjust?)

12 Aug 25, 2013
Reply by leonardthall

"Yes i was in stabilise. Ah ok, i did read i another post that the parameters where n…"

Jakey Boy replied Aug 24, 2013 to Adjusting throttle PIDs (which should I adjust?)

12 Aug 25, 2013
Reply by leonardthall

"Thanks Thomas. Nope, no crash, it has never even been in the air. It's a new setup a…"

Jakey Boy replied Aug 13, 2013 to uBlox gets hot to touch, and now no longer works

3 Aug 13, 2013
Reply by Jakey Boy

"Any input on this would be great :)"

Jakey Boy replied Aug 13, 2013 to GPS started running hot, and now doesn't work at all

1 Aug 13, 2013
Reply by Jakey Boy

"Anybody????"

Jakey Boy replied Aug 13, 2013 to uBlox gets hot to touch, and now no longer works

3 Aug 13, 2013
Reply by Jakey Boy

"Yes it's configured as an X - as it should be. For now i've swapped the servo leads…"

Jakey Boy replied Aug 3, 2013 to APM - Elevator and rudder appear to be mixed up!

2 Aug 3, 2013
Reply by Jakey Boy

RSS

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service